Request For Quotation Acquisition Of Other Fixed Assets

Chair For Primary Grade. Student Chair (Polypropylene), Stabilized. Dimensional Dimensions. Width 430 Mm. Depth 430 Mm. Sitting Height 450 Mm. Height, Taking Into Account The Back Of 810 Mm. Production Material. Sitting High -Strength Polypropylene. User Characteristics. The Frame Of The Chair Is A Flat Pipe With A Polymer Coating. Additional Characteristics. The Base Of The Chair Is Metallic, Forms Four Legs, From A Pipe With A Diameter Of At Least 22Mm, Covered With Polymer Paint. It Consists Of Two Supports Of A Curved Shape In The Upper Part, When The Blank Bends, It Is Necessary That The Folds (Corrugation) Are Not Formed On The Inside Of The Angle Of The Pipe, Since They Are Concentrators Of Stresses And Reduce The Strength Of The Part. The Supports Between Themselves Are Interconnected By Pipes, To Which The Seat Is Attached To The Screws. The Supports To The Floor Have A Gradual Expansion For Stool Stability, At The Ends Of The Supports, Plastic Plugs That Protect The Floor From Damage. The Back And Seat Are Made Of Cast Polypropylene, Forms A Single Curved Shape. The Corners Of The Seats And Backs Are Rounded By Radii, The Back Of The Stool’S Seat Is Made With An Ergonomic Shape And Has Side Support For The Convenience Of The Sitting. In The Middle Of The Back Of The Chair There Is A Hole In The Shape Of A Handle For Lifting And Transferring A Chair. Provides The Material With High Resistance To Blows, High Heat Resistance And Low Smoke Formation. Resistance To Scratches, Resistance To Pollution, Resistance To Water Vapor, Fire Resistance, Moisture Resistance. Coordinate Colors With The Customer. According To Gost 12029-93 (Iso 7173-89).