Bids Are Invited For Hiring A Specialized Company To Provide School Furniture, Intended To Meet The Needs Of School Units Linked To The Municipal Secretariat Of Education Of Angical/Ba

Fixed Secretary Chair, Without Arms; Seat/Back With Anatomical Modeling Produced In Virgin Plastic Resin, Through The Thermoplastic Injection Process. Ergonomic Curvature Seat Measuring Approximately 400Mmx410mm And Minimum Thickness 4Mm. Backrest With Anatomical Curvature Measuring Approximately 410Mmx250mm And Minimum Thickness 4Mm. Steel Tube Structure Approximately 16X30mm, Minimum Thickness 1, 5 Mm, Which Base The Seat And Feet. Two Horizontal Bars Of 7/8 Pipe Reinforcement With Minimum Thickness 1, 2Mm Fixed Between The Columns That Connects The Base Of The Seat. Base Of The Seat And Interconnection To The Backrest In A Tube Of Approximately 16Mmx30mm Measuring At The Minimum1, 5Mm Thick, With Ergonomic Curvature For Accommodation. The Entire Metal Structure And Made Of Industrial Steel Tube Treated By Chemical Bath Sets For Protection And Longevity Of The Structure, Interconnected By Mig Welding And Painted Through The Black Epoxy System. Manufacturers Warranty., Wallet With Sideboard: School Chair With University Clipboard In Thermoplastic Resin, Capable Of All Of An A4 Sheet Of Horizontal / Vertical Paper Being Coupled To The Chair And Endowed With Pencil. Clipboard Measuring Approximately: 56Cmx33, 5Cm The Board Attachment To The Structure By 5 Screws, Clipboard Height 3, 5Cm, With Cavity For 10Mm Deep Pencil Door Located In The Central And Side Part. Seat, Backrest Built In Injectable Thermoplastic Resin. Backrest (High -Relief Manufacturer) With Anatomical Curvature Allowing Proper Backing Of The Lower Back, Measuring 420Mmx245mm High By 07Mm Thick With Ventilation Trim, Posted By 04 Screws. Seat With Minimum Dimensions Of 400Mmx410mm Deep With 07Mm Thick, Fixed To The Structure By 04 Screws. Approximate Height Of The 48 Cm Floor Seat And Approximate Height Of The Clipboard To The Floor Of 80 Cm, And Height Of The Back To The Approximately 83Cm Floor. Basket Made Of High Impact, Polypropylene Thermoplastic Resin, Closed On The Side And Rear Parts, Measuring Approximately 400Mmx310mm Deep, Fitted And Screwed Under The Seat, With Two 7/8 Round Tubes Measuring At Least1, 2Mm Thick At The Bottom. 25Mmx25mm Measuring 1, 2Mm Thickness With 4º Ergonomic Curvature Giving Greater Lower Back Comfort, Two Metalon Tubes Of Approximately 25Mmx25mm Measuring 1, 2Mm Thickness The Rear Platter Of The Chair A Dust Below The Seat, To Give More 3/4 Round Tube Structure, 3/4 Measuring 1 2Mm Of Thickness. Three Platters For The Support Of The 25Mmx25mm Metalon Tube Measuring 1, 2Mm Thickness. All Metallic Structure Is Made Of Industrial Steel Tubes Treated By Chemical Baths For Protection And Longevity Of The Structure, Interconnected By Mig Soldie And Painted At 06 Seats. Smooth, Measuring 1600Mmx800mm, Without Amendments, Fixed By Screw, Top/Floor 570Mm, Brand Brand Injected In High Relief And Minimum Thickness Of 5 Mm. Measuring

23,33,304 - BRL

FileName	File Description
Global Tender Document	b876a0cc-0059-4ca0-a189-6f2689399ab3.html