Bids Are Invited For Price Registration For The Eventual Acquisition, Future And Installment Of Electrical Material For The Electrical Infrastructure Of The Municipalitys Lake Dolotage Area Area.

Galvanized Pressure Washer 1/4: The Pressure Washer Should Be Made Of Galvanized Steel, With A Nominal Gauge Of 1/4, Suitable To Ensure Secure Fixation Of Screws In Electrical And Mechanical Installations, Providing Vibration Resistance And Tightening Maintenance. The Product Must Meet The Standards Of Abnt Nbr 7199 Or Correlates, Three -Phase Compact Breaker Din Cap 18 Uniplar Circuit Breaker 100 A: The Three -Phase Bus Should Be Compatible With Compact Compact Din Cap 18, Supporting 100 To Unipolar Circuit Breakers Intended For The Distribution And Protection Of Low Voltage Electrical Circuits. The Product Should Be Manufactured In High-Conductivity Copper Or Aluminum, Isolated According To Abnt Nbr Iec 61439-1 And Correlates, A Wedge-Type Galvanized Armband 2: The Armband Should Be Made Of A Wedge-Type Galvanized Steel With A Nominal Gauge Of Metal Metal Conduits, Walls Or Support Structures. The Product Must Meet The Abnt Nbr 5598 And Related Standards;, Nylon S6 Bush: The Bushing Should Be Made Of High Strength Nylon S6, With Standard Screw Compatible, Ensuring Firmness In Fixing Electrical And Mechanical Components On Solid Surfaces. The Material Should Have Resistance To Deformations, Wear And Thermal Variations, Not Being Electrical Conductor, According To Applicable Technical Standards., Aluminum Head For Conduit 2: The Head Should Be Manufactured In High Mechanical And Thermal Resistance Aluminum, Compatible With Metal Metal Conduit, Cable Cable Xlpe 0, 6/1 Kv 25 Mm² Multiplexed, Quadruple, Aluminum, With Xlpe Insulation (Reticulated Polyethylene), Should Have A Nominal Voltage Of 0, 6/1 Kv, Nominal Section Of 25 Mm², Consisting Of 04 (Four) Aluminum Conductors (03 Phases And 01 Concentric Neutral), Compacted, Stiled, With Steel Soul, Made Of Aluminum Connection 1350-H19 According To Abnt Nbr 10495., Concrete/Masonry Passage 800X800x800 Mm: The Passage Box Should Be Built In Reinforced Concrete Or Structural Masonry, With External Dimensions Of 800 X 800 X 800 Mm, Intended For The Passage And Protection Of Electrical Cables In Underground Distribution Networks. The Product Should Have Adequate Mechanical Resistance To Local Traffic, Smooth Inner Surface, Secure Removable Lid, Compatible With Abnt Nbr 9060 Standards And Correlates;, Frame Set And Vertical Pulley Insulator For Pole: The Pulley -Vertical Set And Vertical Insulator Should Be Made Of High Strength Galvanized Wire, Compatible With Electrical Distribution Cables, Allowing Secure Installation On Posts. The Insulator Should Be In High Dielectric, Weather Resistant And Uv Radiation Insulating Material. The Set Should Meet The Abnt Nbr 5598 Technical Standards, 90º Light Galvanized Steel Curve Thread 2: The 90º Curve Should Be Made Of Light Galvanized Steel With A Nominal 2 -Inch Gauge, Endowed With The Extremities, Allowing Perfect Connection To Conduits And Other Rhdable Metal Accessories. The Product Must Comply With The Technical Standards Of Abnt Nbr 5598 And Correlates, Outbreak Protection Circuit Breaker 275 V 80 Ka: The Outbreak Protection Circuit Breaker (Dps) Should Be Designed For Rated Operating Current To 275 V, With A Maximum Discharge Capacity Of 80 Ka, Meeting Abnt N Standards