Bids Are Invited For Acquisition Of Hospital Medical Equipment

Digital Portable Finger Oxymeter Description: • Type: Portable; • Oxygen Measurement Range: 0 To 199 Per • Maximum Tolerance Error Measurement: 1% To 0, 1 Mg/L • Temperature Range: -5 To 45 C • Type Fixed Atmospheric Pressure: Manual • Additional Characteristics: Lcd Display, Time Reaction Max. 10S, Memory Min., Cardioverter. Defibrillator, Cardioverter, Monitor And Portable Dea, With Biphasic Wave Technology. Energy Level Of At Least 200 Joules. Step And Ecg Brand Parameters. Possibility Of Synchronized And Not Synchronized Synchronized Mode. Manual Defibrillation With Selectable Scale On The Front Panel And Defibrillation Paddles With Dedicated Power Selection Buttons. Load And Shock On The Paddles. Adult External Defibrillation Paddles With Built -In Pediatric. Allow The Power Charge (200 J) Within 7 Seconds With The Battery Fully Charged. Ecg Monitor With Continuous Stroke Via High Resolution Color Lcd Screen With At Least 5 Inches. Have Automatic Pacemaker Detection. Ecg Capture Through Patient Cable, Multifunction Electrode Or Outdoor Blades. Defibrillation And Defibrillation Electrodes Should Use The Same Connector. Have Manual And Semi -Automatic Modes Of Defibrillation (Dea). Have Step And Ecg Registration Through Paper With A Minimum Width Of 50 Mm. Perform Autoteste To Check The Functionality Of Equipment, Charging And Discharge Of Shock And Battery Charge. Future Upgrade Possibility To Get Feedback On The Screen And Through Voice Messages From The Depth Of Compressions During Cpr. Internal Source For Network Feeding 110/220 V Automatic And Battery Recharge. Lithium -Ion Rechargeable Battery With Minimum Autonomy For Two (2) Hours Of Continuous Ecg Monitoring Without The Need For Exchange Or Recharge During This Period. Brand Frequency Step At Least 30 To 180 Ppm. Allow Easy Battery Removal For Exchanges And Can Be Done By The User Himself, Without The Need To Use Other Tools And Without Dismantling The Equipment. Have Load Level Indication Leds. Have Liquid Input Protection (On Battery) Equal To Or Greater Than Ip44. Weight: 7 Kg (+/- 10%) With The Battery Installed. The Equipment Must Be Framed In En1789 Or Iec 68-, Emergency Car. Minimum Technical Specifications: Structure Built On Structured Aluminum Structural Profiles; Polyurethane Side Closures And Rear Closure In Pvc Or Superior Quality Material; Upper Polyurethane Tray Or Superior Quality Material, With Retention Edge And Side Handles; 5 Drawers Made Of Polyurethane With Internal Partitions For Medications And Materials, With Lock System, With Telescopic Rail And Handles, Being The 04 Upper Of Approximately 150Mm High For Storage Of Procedures And The Lower Drawer With Approximate Height 300Mm; System That Enables A Single Seal For All Drawers. The First Two Upper Drawers Are Expected To Have Approximately 24 Partitions For Storing Polystyrene Medications. Contain Height Adjustable Serum Support, Protective Edge Cardioverter Support And Approximate 400Mm X 400Mm Dimensions; Support For Oxygen Cylinder With Velcro -Type Closure. Contain Acrylic Cardiac Massage Board; Ruler With At Least 04 Standard Nbr, 2P + T With Cable