Tenders Are Invited For Delivery In The Form Of An Operational Lease Of A Factory New 2 Axle Chassis With Factory New Garbage Truck Municipal Buildings.
Tenders Are Invited For Delivery In The Form Of An Operational Lease Of A Factory New 2 Axle Chassis With Factory New Garbage Truck Municipal Buildings.
Description Of The Subject Of The Contract1) The Subject Of The Contract Is The Purchase And Delivery Of 1 Item. Factory New, Produced Not Earlier Than In 2025 And Previously Not Registered Car Intended For Collecting Municipal Waste, Single -Chamber, With The Rear Load Of Waste On A Two -Axle Chassis.2) Parameters And Technical Data That The Vehicle Must Be Met: 1) Type: 1) Type: 1) Type Chassis: Two-Axle In The 4X22 Axis Configuration) Vehicle Adapted For Right-Hand Movement3) Vehicle Adapted For The Construction Of The Garbage Truck, To The Standard Pn-En 1501-01: 20214) Chassis With Dmc Min 11.900 Kg Adapted For Dust-Free Building5) Pneumatic7) Load Capacity Of The Chassis-Construction Set Min. 3,000 Kg. 230 Km And Max. Torque Min. 950 Nm10) Euro Emissions Euro Vi E 11) Engine Jumping From 7000 Cm3 To 9000 Cm312) Automatic Or Automatic Gearbox 13) Explock Power Reception Attachment14) Good Good Good Good Fuel, 18) 2 Batteries Min. 100 Ah, 19) Front And Rear Axle Disc Brakes, 20) Steel Rims With Tires Adapted To The Maximum Technical Load Capacity Of The Chassis Axis.21) Pressure Control System In Tires22) Fuel Tank Min 120 Liters Aluminum Or Made Of Plastic With A Lockable Traffic Jam23) Tank Adblue Min 30 L, 24) Fire Extinguisher, Set Keys With A Lift Of Min 10 Tons, 25) Two Two Wedges Securing The Vehicle Against Movement In A Sloping Area, 26) Front Towing Hitch, 27) Abs Systems, Ebs, Ebs, Esp28) Safety Package- Collision Warning System At The Front With Emergency Braking- Detection Of Unprotected Road Users At The Front29) Cabin Three (Daily) 3-Day Cabin) Floor Mats, 32) Steering Wheel On The Left, Adjustable Steering Column33) Heated And Electrically Adjustable Right And Left34 Rearview Mirrors) Ramp (Front) And Curbing 35) Electrically Controlled Windows Of The Driver And Passenger Door Windows, 36) Drivers Seat With Pneumatic Suspension37) Polish38) Factory Immobilizer, 39) Central Locking With Remote Control40) Air Conditioning 41) Display With A On-Board Computer In Polish42) First Aid Kit, 43) Adaptation Output For Connecting The Device Gps44) Radio45) Radio 45) Socket In The 12V- And 24V 46 Cabin) Front Axle Pneumatic Pumping Of Wheels With A Cable And A Pressure Gauge, 48) Complete Vehicle Approval Required49) Two Keyboard Sets: 1. A Oval -Shaped Loading Box, Without Begging2. The Sides Of The Box Made Of Thickness Sheets Min. 3 Mm, Made Of Uniform Sheets3. Factory Box New With Rear Loading Device, Designed To Collect Solid Waste Collected In Municipal Containers, Secondary Raw Materials And Bulky Waste4. The Loading Gearbox Is Completely Welded, Tight, Made Of Hard -Eaten Sheet Metal5. Cargo Gear Capacity Min. 9 M36. The Volume Of The Charging Basket Of The Abdomen Min. 0.8 M37. Load Capacity Of The Chassis-Construction Set At Least 3000 Kg. 8. Tight Connection Of The Abdomen With The Load Box9. A Tuber With A Folding Flap That Allows You To Lower The Loading Edge For Manual Loading Of Bags And Dimensions10. Inspection Doors, Con
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.