Gost 17375-2001. Division Of Steel Seamless Welded Steeply Reduced Du 40Mm 90 ° Material: Steel Type: Steeply Reduced Engineering System: Water Supply, Heating, Heat Points, Fire Extinguishing Mass: 0.32 Kg Type Of Connection: For Welding Diameter: 40 Mm Pressure: Ru40 External Diameter: 48.3 Mm Wall Thickness: 3 Mm Production Country: Russia Working Environment Temperature: From -70 To +450 Oc, Gost R 50601-93 Cold Water Meter Flange Dn 80 Mm Industrial, Turbine ● Diameter Of The Conditional Passage, Mm: 80, • Metrological Class / Accuracy Class: B, • Type Of Counter: Turbine, • Temperature Range Of The Measured Medium, ° C: From +5 To +50, • Installation Length, Mm: 225, • Degree Of Protection: Ip67, • Method Of Connection: Flange, • Type Of Water Supply: Cold, • Joining The Pipeline: Du80, • Intermation Interval: 6 Years., Nipple With External Carvings Of Du15mm Is A Compact And Strong Connecting Element Specially Designed To Join Two Sections Of The Pipeline. Type Of Thread: External Production Material: - Brass. Type Of Connection Connection - External Thread; Direct. The Diameter Of The Thread At The Input Is 1/2. The Diameter Of The Thread At The Output Is 1/2. • Maximum Operating Pressure - 40 Bar, • Maximum Operating Temperature - +95 ° C., A Three -Way Crane For The Manometer Ci 11B18bk Du15 With A Pen. Characteristics And Description: Type Of Shutter - Cork Conical. The Conditional Passage Is 15 Mm. The Working Environment Is Water. Type Of Connection - Coupl The Maximum Operating Temperature Is 150 Degrees. The Maximum Operating Pressure Is 16 Bar. Hardness Class - A. Brave Material - Brass. Color Is Yellow. The Ci 11B18bk Crane With A Handle Is Designed To Join The Working Manometer Of The Highway With The Working Environment. The Crane Consists Of The Following Parts: Housing; Cork; Washer; Spring Puck (Grover); Screw. The Mating Surfaces Of The Crane Housing And Corks Are Greased With Grease. Through The Coupling Ends, The Crane Joins On One Side To The Pipeline, On The Other To The Working Manometer. The Crane Cork Has A T-Shaped Passage. This Allows You To Direct The Flow Of The Working Environment To The Manometer, As Well As To Discard Pressure From The Pressure Gauge, Turning Off The Manoometer From The Highway At The Same Time. On The Upper End Of The Cork, Slots Are Made, Indicating The Location Of The Passage Holes., The Shutter Disk Swivel Cast Iron Is 80 Р16 Between The Flange With The Handle. The Type Of Connection Is Interflant. Type Of Control - Manual (Handle, Gearbox) Nominal Pressure Pn - 16 Bar The Temperature Of The Working Environment Is From -30 ℃ To 130 ℃ Hardness Class According To Gost 54808-2011 - A Building Material-Cast Iron Gg25/Cc25/En-Gjl-250 Disk Material-High-Strength Cast Iron Ggg40/° Pf40/En-Gjs-400-15 Seal Type - Epdm, Valve Reverse Brass Du 15Mm. The Body Material Is Brass. Pipe Diameter 15 (Mm). The Maximum Operating Temperature Is 80 ° C. The Thread Is Internal. The Valve Is The Reverse Brass Braid Sti 15 (1/2) Is Designed To Install For Pipelines For Various Purposes And Passes The Transported Medium In One Direction (Indicated By The Arrow On The Valve Case). Cleaned Air, Cold And Hot Water, And Other Fluids Are Non -Aggressive To The Valve Materials. Characteristics Nominal Diameter (Dn) 15 Nominal Pressure (Pn) 16 Working Environment Water, Air Type Of Connection Of The Coupling Maximum Working Environment Temperature, С ° 80 Nominal Diameter Of The Thread G½ Brass Body Material Locking Material Plastic, Pnd Plug 110 Mm. Sdr 11. Net Weight - At Least 1.03 Kg. Nominal Pressure - Pn 16 Bar. Pipe Diameter - 110. Material - Pnd. The Material Of The Clamping Ring Is White - Polyacil. The Material Of The Sealing Ring Is Nitrilum Rubber (Nbr). Connection - Compression/External Thread. The Temperature Of The Working Environment Is Up To +40 ° C. Type - Clutch. Type Of Thread - Pipe Conical Seal - Nbr. The Length Is Not Less Than 165Mm.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.