The Subject Of The Contract Is: Insulation Of A Public Primary School Building In Turza Along With The Replacement Of Lighting Fittings And Central Heating Installations, Installation Of Heat Pumps And The Construction Of A 7.29 Kwp Solar Installation. The Subject Of The Contract Covers The Following Scope Of Work: A) As Part Of Thermomodernization Works: - Assembly Of Scaffolding, - Protection Of Windows And Doors With Foil, - Dismantling Of Flashings, Including External Window Sills, Gutters And Drain Pipes, - Dismantling Of Elements Built On Building Facades (Boards, Ventilation Grilles, Etc.) Recreation After Completed Robots, - Insulation Of External Walls Of The Building With The Help Of Eps Nro Polystyrene With Gr. 15 Cm With Insulation Of The Jam With Foamed Polystyrene With Gr. 3 Cm,- Location Of Thin-Layer Plaster With A 1.5 Mm Silicone-Silicon-Colored Granation In Mass,- Insulation Of The Plinth And Foundation Walls Of The Building Using Xps Polystyrene With Thickness. 15 Cm With Waterproofing, - Reconstruction Of The Rainwater Sewage Approaches And Replacement Of Downpipes And Gutters, - Replacement Of Windows With Pvc Windows, - Replacement Of External Doors With Aluminum, - Insulation Of Building Flat Roofs Using Nro Styles With A Thickness Of 20 Cm, Mineral Wool With Gr. 20 And 25 Cm, - Installation Of Flashings (New Material), Including External Window Sills, Gutters And Drain Pipes, - Repair Of Chimneys And Ventilation Openings, - Assembly Of Elements Dismantled From The Building Facade, - Making A Concrete Cube Band Around The Building And Reproducing The Dismantled Surfaces, - Export And Disposal Of Debris, B) Lighting: - Disassembly Of Currently Exploited Lighting Fixtures, - Assembly Of New Frames Of Basic, Evacuation And Emergency Lighting In Led Technology, C) As Part Of The Replacement Of The Central Heating Installation.: - Disassembly Of The Existing Installation, Excluding Concealed Flush -Mounted, Non -Closing With The Designed Installation, - Assembly Of A New Heating Installation Of The Central Heating, In This Tap Low-Transit And Regulatory And Reinforcing Fittings,-Connecting The Designed Central Heating Installation. For Designed Installation Manifolds In The Current Boiler Room, - Reproductive Works Related To The Designed Installation Works, Including In Particular The Bricking Holes After Dismantled Deposits And Radiator Branches, Which Will Not Be Used For The Purposes Of Conducting A New Installation, - Plastering (Plastering After Transmission, Wall Damage And Ceiling Resulting During Works), - - Painting Works (Including The Selection Of Colors In Accordance With The Existing) Performed After Restoring And Replenishing Plasters, - Robots Related To The Focus Of Damaged Wall Tiles And The Arrangement Of New Ones, - Works Related To The Reconstruction Of Local Floor Coverings After Dismantled Heating Verticals, D) As Part Of The Installation Of Heat Pumps: - Cascade Of Two Heat Pumps, I.E. Heat Pump System Wi
