Tenders Are Invited For Purchase Of Equipment, Equipment And Uniforms Under The Civil Protection And Civil Defense Program For 2025-2026

Part 1 Special Clothing Two -Part 60 Sets. The Special Clothing Jacket Must Meet The Following Requirements:  Is To Be Fastened With A Single -Headed Metal Zip With An Emergency Extending System. The Zipper Is To Be Covered With An Outer Fabric Pleat With Waterproof Finish. Fastening The Pleat With Velcro Tape, Continuous  Jacket Is To Be With A Multi -Layer Structure Should Occur On Pants. The Back Of The Jacket Is To Be Extended Compared To The Front, The Jacket Sleeves Are To Be Wide, Finished With A Flexible Welt With A Thumb Opening. A System Is To Be Used In The Sleeve Cuffs That Allows You To Adjust The Sleeve To The Wrist. The Lower Edges Of The Cuffs Are To Be Finished With A Layer From Kevlar 13 In The Upper And Lower Part Of The Jacket, There Are Four Multi -Functional Pockets And Clamps For Fixing, E.G. Flashlight, Radio, Gloves, Arranged Ergonomically. Pads Of The Pockets Are To Be Secured And Finished With Kevlar Handles, Facilitating Access To Gloves Pockets. In Each Pocket, The Jackets Are To Be Carabiners And Loops For Fastening Small Equipment, The Elbow Area Is To Be With An Additional Protective Layer Against Wiping, Fire And Temperature, It Is To Be Reinforced With A Layer From Kevlar 13 The Jacket Collar Is To Be In The Form Of A Stand -Up Collar, Fastened At The Front With Velcro. On The Stand -Up Collar On The Left And Right, The Vertical Handles That Make It Easier To Run The Radio Cable On The Back In The Lumbar Part And Shoulders Are To Be Internal Elements Cushioning Pressure From The Load -Bearing Tapes Of The Respiratory Apparatus. Kg Psp. Special Clothing Pants Must Meet The Following Requirements:  Long Pants Are To Be With A Multi -Layer Structure With Braces, The Braces Wide Are To Be With The Adjustment System, Acting On The Principle As In The Respiratory Apparatus, Enabling A Quick And Convenient Matching Of Bustle In The Gloves, The Knee Area, Is To Include A Protective Layer Against Wiping, Fire And Temperature. Kevlar, Is To Have An Additional Insulating Rubber Layer And Protection Against Moisture, The Lower Edges Of The Legs And The Lower Inner Parts Of The Legs Are To Be Finished With A Layer From Kevlar 13 Pants Must Have Four Multi -Functional Pockets, Ergonomically Covered With Flaps Protected At The Ends Of The Kevlar, Enabling Access. Reflective Warning Tapes And Formation Designations) Must Meet The Requirements Of Opz Kg Psp. Knee Protection Is To Have Replaceable Kevlar Pillows In Pants In Pants, The Braces In Pants Are To Be Regulated With The Possibility Of Removing Resistance To Heating 469: 2020. The Outer Clamp Of Special Clothing Should Be A Fabric With Oil And Waterproof Finish In Yellow In The Shade Of A Natural Aramid. 75% Meta-Aramid, 23% Para-Theramid, 2% Anti-Static Fibers. The Clothes Of The Clothes Are To Be Two-Layer, With An Additional Thermal Insulation Layer. Structural Fabrics Clothes And Threads Should Be Made Of Fibers, Whose Trait Of Hardly Stomach (Flame Spread Indicator

Refer document

FileName	File Description
Global Tender Document	Tender Notice