Support, For Fire Extinguisher, Wall, Type L, In Galvanized Accepted, With Capacity To Support Up To 22 Kg, Extinguisher, Po, Dry Chemistry, Portable, Bc Class, 4 Kg Capacity. The Item Should Meet The Inbound And With Seal From Inmetro Label Information: - In Portuguese Language; - Indicating The Manufacturers Name And Distributor; - Type And Agent Of The Extinguisher; - Type Of Fire For Which The Extinguishing Agent Is Indicated; - Weight And Extinguishing Capacity; - Instructions For Use; - Abnt-Nbr And Inmetro Certification Seal With Validity Date Of The Recharge Service Warranty; - Minimum 12 -Month Warranty., Fire, Pressurized Water Type, Class A, 10 Liters Capacity. Lvel: The Following Information Should Be Printed Or Glued By The Manufacturer Directly On The Product: Name/Cnpj Of The Manufacturer, Product Brand, Address, Composition, Date/Expiration Date Of Refill Service, Type And Agent Of The Extinguisher, Type Of Fire For Which The Extinguisher, Weight And Capacity Is Indicated, Minimum Warranty Of 12 Months, Instructions For Use In Portuguese Health And Safety Of Consumers. The Product Should Contain The Inmetro Conformity Identification Seal, Being Visibly, Readibly And Indelibly In The Product And Individual Packaging. At The Date Of Delivery, The Expiration Date Indicated For The Product, Must Not Have Been Exceeded In Its Half, Taking As Reference, The Manufacturing Date Or Batch Or Expiration Date; Printed On The Packaging. Meet The Internal Ordinance (S) In Force (S) (S), Dry -Chemical Type (Pqs), Multipurpose (Abc Classes), Capacity 6 Kg. Lark: The Following Information Should Be Printed Or Glued By The Manufacturer Directly On The Product: The Manufacturers Name/Cnpj, The Manufacture Date Or Lot Or Validity Date; Printed On The Packaging. (Co2), Bc Classes, Capacity 6 Kg. Label: The Following Information Should Be Printed Or Glued By The Manufacturer Directly On The Product: Name/Cnpj Of The Manufacturer, The Manufacturing Date Or Batch Or Validity Date; 4 Sensors, Which Allows Simultaneous Detection Of Up To 6 Gases, Depending On Its Configuration. This Device Should Be Provided With The Sensors That Detect The Following Gases: Oxygen (O2), And H2s Between 0, 5 To 100 Ppm. With A Response Time Of Less Than 10 Seconds. It Should Be Fed Through A Rechargeable Battery. The Instrument Should Be Used Intuitively, Having A Practical Control Panel, With Only Two Button And A Menu With Direct Navigation System.
