(L1) 8301.104288-Bandeira, Type: Double-Breeded Beach, Material: Polyester, Measurements: Height: 75Cm, Length: 100Cm, Finishing: Overlock, Color: Red (#Ff0000), Personalization: Paranás Guard Coat, Color: Yellow (#Ffcb00), Source: Arial, Height: 30Cm, 30Cm, 30Cm, 30Cm Additional Characteristics: With Opening For Rod Fixing Measuring 10Cm, Units. Measurement: Unit, (L1) 8301.104289-Bandeira, Type: Medium Risk, Color: Yellow (#Ffcb00), Color: Red (#Ff0000 /#F00), (L1) 8301.104290-Bandeira, Type: Not Protected Area, Color: Black (#000000 /#000), (L1) 8301.104291-Band Type: Low Risk, Color: Green (#009440), (L1) 8301.104294-Bandeira, Type: High Risk, 11/09/2025, (L2) 8301.104288-Bandeira, (L2) 8301.104289-Bandeira, (L2) 8301.104290-Bandeira, (L2) 8301.104291-Bandeira, (L2) 8301.104294-Bandeira, (L3) 4501.71558 Cano, Type: Solidable, Material: Pvc, Gauge: 1.1 / 4, 6M, (L3) 4501.102703-Tampon / Cap, For Use In Sewage Networks: 50Mm, Color: L4) 4501.71558 Cano, (L4) 4501.102703-Tampão / Cap, (L5) 4205.104295-Mascara, Type: For Rescue, Cardiopulmonary Resuscitation-Rcp, Use: Adults And Children, Presentation: With O2 Entrance, Unidirectional Valve, Filter And Elastic Strip, Made Of Soft Flow To Avoid Air Flea, Transparent, Latex And Non-Toxic-Free Material, To The Mouth Of The Rescuer Not To Contact The Victim, With Connector To Attach Respiratory Aid Equipment, Additional Characteristics: With Storage Case, (L6) 4205.104295-Mascara, (L7) 8301.104296-Wind Banner, Type: With Two Segments Connected By The Side To Be Fixed On The Side Specifest, Specifications: Segment 1: Composed Of A Two -Color Flag, Which Should Be All 85Cm Long And 56Cm High, The Colors That Divide The Flag Should Have The Following Measurements: A Color 85Cm Long And 32Cm High And The Other Color With 85Cm In Length And 24Cm High, All Sides With A Minimum Overlocking Machine Points With Bar 1, 5Cm Thick In All Its Surroundings, Segment 2: Wind-Banner (Knife Format) With Two Colors And Dimension Of 160Cm Vertical Length And 40, 6Cm In Its Largest Width, A Color Located At The Top And Another Color Located At The Bottom, Will Have The Vertical Length Of 80Cm, The Sides Should Have Finishing In Overlocking Machine Points And Bar Stitching Points Straight With At Least 1, 5Cm Thickness In The Entire Surroundings, At The Lower End Should Have A Stainless Steel Look Rivet, Allowing The Piece To Fix On The Pvc Rod Or Predict A Minimum 3Mm Thick Cord And 6Mm Maximum, On The Vertical Side Of Both Parts, Flag And Wind-Banner, And In The Same Alignment, Should Have The Bar With A Sewn Finish Straight, Containing At Least 10Cm And A Maximum Of 12Cm Wide, Where You Can Insert 50Mm In Diameter Pvc Piping That Will Be Used As A Fixing Rod, Additional Characteristics: Customization According To Organ/Entity Requesting, (L8) 8301.104296-Wind Banner, (L9) 7102.104300 Plastic, Type: With Arm, Material: Material: Polypropylene, Anti- Uv, Weight: 2Kg To 3Kg, Capacity: Supports Up To 180Kg, Measurements: Height: 79Cm, Width: 56Cm, Depth: 42Cm (Variation Of +/- 10%), (L10) 7102.104300 Plastic Case, (L11) 8104.104385-Caise, Type: Alc, Material: Polypropilene (Pp), Measurements: Height: 3
