Tenders Are Invited For Modernization Of The Road In Jeżewo On Plots No. 226, 218, 219

1) The Subject Of The Order Is The Modernization Of The Municipal Road In Jeżewo, Commune Of Łabiszyn.2) Location: • Plots No Dw246 From The End Of The Existing Exit From The Provincial Road) To Km 1+320 (Behind The Exit To Property No. 45 In Jeżewo - Plot No. 230). The Section Of The Modernized Road Is 1323 M Long. The Road In Question Is Access To Arable Fields And Farm Buildings. Modernization Will Consist In Making A Bituminous Overlay On The Existing Crushing Road And Strengthening The Ground Roadside. Asphalt Concrete Surface Is Designed At The Conventions. The Roadside Should Be Made Of 0.75M Width -Width -Width -Stabilized Aggregate And 0.25 M Width Width Width (Total 1.0 M) Design Assumptions: • Road Class - Municipal Internal: D • Designed Speed - 40 Km/H • Movement Category - Kr 2 • Road Width - 3.5 M Obrava With Ba Ac8s Thick. 4 Cm • Ba Ac16w Ba Ac16w 4 Cm • Value Layer Of The Mixture Not Related To The C90/3 Aggregate With A Grain Of 0/31.5 Mm Thick. 15 Contruction Of Butumic Contructions: • Arm Activery With Ba Ac8s Grup. 4 Cm • Ba Ac16w Ba Ac16w 4 Cm • Value Layer Of The Mixture Not Related To The C90/3 Aggregate With A Grain Of 0/31.5 Mm Thick. 15 Cmonstruction On Parted Points • A Compelling Layer Of A Mixture Not Related To C90/3 Aggregate With A Grainage Of 0/31.5 Mm Thick. 15 Cm4) A Detailed Description Of The Subject Of The Contract Was Described In: A) Annex 5 - Construction - Executive Project) Annex 6 - Disable Project Of The Ruchucs Permanent Organization) Annex 7 - Technical Specification) Annex 8 - Premier 5) Warranty. The Contracting Authority Requires The Granting Of Min. 24 Months Of Warranty (In Accordance With The Civil Code) For The Works Related To The Subject Of The Contract. The Warranty Is A Criterion For Assessing Offers And Is Subject To Assessment, The Contractor Will Be Obliged To Determine The Length Of The Warranty In The Offer Form Attached To Swz.6) If The Design Documentation Would Indicate In Relation To Some Materials Or Devices Of Names, Trademarks, Patents Or Origin, Utility Features, Which Must Be Met By The Materials Or Devices Offered By The Contractor To Meet The Requirements. By The Ordering Party And Constitute Only A Qualitative Pattern Of The Subject Of The Contract. By The Term Minimum Quality Parameters And Utility Features, The Contracting Authority Understands The Requirements For Materials Or Devices Contained In Generally Available Sources, Catalogs, And Manufacturers Websites. Operating Examples Of The Manufacturers Names Is Only Aimed At Clarifying The Level Of Expectations Of The Employer In Relation To A Specific Solution. The Employer, Indicating The Designation Of A Specific Manufacturer (Supplier) Or A Specific Product When Describing The Subject Of The Contract, At The Same Time Allows Equivalent Products With Quality Parameters And Utility Features At Least At The Level Of Parameters Of The Indicated Product, Thus Recognizing Each Product With The Indicated Or Better Paramet

Refer document

FileName	File Description
Global Tender Document	Tender Notice