Request For Quotation Acquisition Of Fire Equipment

The Firefighter Light Breaks Up For Shields Is Designed To Open Building Structures, Parts Of Which Are Tightly Adjacent To Each Other (Floors, Plank Farms, Partitions, Door Boxes, Etc.). The Flame Of The Fire Shield Is Light And Durable, Which Is Reliable And Convenient To Use. Ves 3.5 Kg. Length 1100 Mm. The Material Of The Working Part Is Metal. Type Of Lom Tool., The Sleeve For The Fire Engine Is Rpm-51-1.6 Gr-50-2 Pcs., Frost-Resistant Standard, Rpm (B) -1.6-Uhl1. Fire Sleeve With An Internal Waterproofing Layer. In The Manufacture Of These Sleeves, A Layer Of High -Quality Waterproof Material Is Used. It Provides An Even Water -Repellent Surface Inside The Sleeve. The Sleeve Is Resistant To Atmospheric Effects. Without Fire Hoses, The Normal Operation Of Emergency Rescue Calculations During The Elimination Of Flame Foci Is Impossible. They Are An Integral Component Of The Technical Equipment Of Rescuers, Are Included In A Set Of Special Inventory Stored On Industrial And Warehouse Objects Of Real Estate. The Working Pressure Is 1.6 Mpa, Diameter 51 Mm, Length 20 M, The Fire Bucket Is Designed For Use As A Primary Fire Extinguishing Agent In Order To Deliver Manually Water And Sand. Technical Characteristics. Firefighting Bucket - Hinged. The Installation Site Is Firefighters. Operating Conditions - Ambient Temperature From Minus 45 ° C To Plus 50 ° C With Relative Humidity Up To 90%. Storage Conditions - In Open Warehouses. Diameter 300 Mm. Height 350 Mm. Capacity 7 L. Mass 0.3 Kg. Material Metal., The Rope Fire Rescue 30 Meters (Vps-30): A Rope Designed To Insurance Of Firefighters When Extinguishing Fires And Conducting Related Emergency Rescue Operations. The Technical Requirements Of The Rope Of The Fire -Rescue Vps30: The Breakdown Load Of The Vps Rope Is At Least 10 Kn. The Length Of The Vps-30 Rope Is At Least 30 M. The Diameter Of The Vps Rope Cord Is (11 ± 1) Mm. Rope Mass: Vps-30 Not More Than 2.7 Kg;. The Cover Is Red, Round., Fire Fire Pp-600 Are Used As An Effective And Non-Expensive Means Of Extinguishing Local Fire Foci In Class Fires: Length 1.5 Mm. Width 2 Mm. Weight 500 Kg. Warranty Period 12 Months., Sleeve On A Fire Engine- For Internal Fire Cranes, For External Fire Cranes, For Fire Cranes, Universal, For External Fire Water Sources, For Fire Equipment, For Fire Engines. Country Manufacturer Russia. Diameter 66 Mm. Length 20 ± 1M Working Pressure1.6 Mpa, The Firefighter Is Designed To Store Fire Inventory, Fire Extinguishers, Fire Canvas. The Shchpo-01 Shield Are Prefabricated, Delivered In Convenient Compact Packaging. Manufacturer Yarpozhinvest, Country Manufacturer Russia, Functional Purpose For Placing Fire Extinguishers (Spike-O) The Color Of The Red Body Red On, Respiratory Apparatus For Firefighters. It Provides Comfort And Versatility That Are So Necessary For Quick Response Services. This Modern Respiratory Apparatus, Which Is Characterized By Low Weight And High Strength, Provides Maximum Respiratory Protection. The Country Of The Manufacturer-Germania. Type Is A Self-Rescuer. Please Coordinate The Goods With The Customer., Designed For Localization Of Combustion In The Initial Stage Of Fire, Throwing From Boxes For Sand And Extinguishing The Sand Of Fire, Disassembly Of Roofs, Walls And Partitions When Extinguishing A Fire. A Shovel (Soviet) Is Used To Complete Fire Shields And Fire Stands. Country Manufacturer Russia. Material Material Metal, A Knife For A Seat Belt. A Hardened Stainless Steel Blade. Easily Cuts Any Belts, Including Seat Belts. Especially Indispensable As A Necessary Tool In Crisis Situations. It Is Included In The Mandatory Configuration Of Rescuers. Made In Taiwan. (China) The Color Is Red., Fire Shovel Bayonet. The Overall Dimensions Of The Bayonet Fire Shovel: 1450X215x50mm. The Mass Of A Bayonet Fire Shovel Is No More: 1.9 Kg. The Fire Shovel Is Part Of Fire Shields And Stands. A Firefight Shovel Can Be Used To Localize Or Extinguish Weak Grassroots Fires (At The Initial Stage Of Their Development) By Filling The Focus Of Fire Or Sand, As Well As To Clear The Fire Sites And Drag Burning Materials. Country Manufacturer-Russia. Weight 1.9 Kg Manufacturer Yarpozhinvest., Bullet For The Respiratory Apparatus. Fully With A Belt Heading. A Full -Faced Mask With An Adapter For Attaching To A Helmet. Mask Connectors. Please Coordinate The Goods With The Customer., Fire Extinguishing Powders Are Finely Mined Mineral Salts With Various Additives That Prevent Coting And Lumps. As The Basis For Fire Extinguishing Powders, Phosphoronammonium Salts Are Used (Mono-, Diammony Phosphates, Ammophos), Carbonate And Sodium Bicarbonate And Potassium, Sodium And Potassium Chloride, Etc. Silicon-Organic Compounds, Air-Sulca, White Soot, Steel Steel Steel Steel, Talc, Etc. Only Hydrophobic Types Of Additives Are Used, Which Prevents The Coding Of The Powder, Such As Hydrophobic Aerosil And So On., This Model Of Sand Box Is Distinguished By The Exceptional Convenience Of Extraction Of Sand. The Design Of The Box Provides The Convenience Of Extracting Sand And Eliminates Precipitation (As Required By Ppb 01-03 And Gost 12.4.009-83). Sand Boxes Are Used To Place Sand In It, To Eliminate Fire Or Sunbathing, In Case Of Leakage Of Oil Products, Such As Gasoline Or Fuel Oil, And Other Substances Prone To Spontaneous Combustion. Sand Boxes Must Be Installed Next To Objects, The List Of Which Is Indicated In The Fire Safety Rules, Along With Fire Shields In The Rooms And Outdoors, Mainly In Places Of Probable Rosilline Of Combustible And Flammable Liquids (Gas Stations, Storage Facilities, Various Enterprises, Etc.). Height - (Front Part 450 Mm, Rear Part 500 Mm) Length - 500 Mm Width - 397 Mm, The Fireturler Powder Op-50 Is Designed To Extinguish The Fire Of Classes A (Solid Substances), C (Liquids), C (Gases), As Well As Electrical Equipment That Is Under Voltage Up To 1000 V. It Is Used In Industrial And Warehouse, At Gas Stations, In Logistics Centers, At Transport Facilities, In Transport And Other Zones With Increased Fire Hazard. Op-50 Fire Extinguisher A Sprayer Hose. Passport And Operating Manual. Filling And Check. The Length Of The Emissions Of The Fire Extinguishing Matter: At Least 6 M. We Ask You To Coordinate The Goods With The Customer., A Carbon Dioxide Of High Pressure With A Charge Of Liquid Dioxide Carbon, Which Is Under Pressure From Saturated Vapor Of The Rolling Yarpozhinwan Ou-50, Is All Disconnected For Extinguishing Fires Of Type: In-Liquid Substances, C-Gaseous Combustible Substances, E-Electrical Installations That Are Under Voltage. The Capacity Of The Case Is 3X25.6 Liters. Mandatory Reloading Should Be Carried Out 1 Time In 5 Years. Charging, Reloading, Examination And Maintenance Of The Fire Extinguisher Should Only Be Done At Maintenance Stations Having An Appropriate License. Used In The Temperature Range From -40 To +50C, The Firefighter For The Fire Shield. Bagor Is Designed To Perform Various Work When Extinguishing A Fire, Used To Clear The Fire Site, They Open The Roofs, Disassemble The Walls And Partitions, And The Materials From The Focus Of The Fire Are Pulled Out. It Is Convenient To Transfer The Fire Bucket With Sand Or Water With A Crimson. The Hilt Of Bagra Can Beat Off The Plaster From The Ceiling Or Wall., Bop-1 Is A Standard Set Of Firewear, Used By Professional Departments Of The Fire Service. The Full Set Includes The Following Elements: 1. The Jacket And Trousers Are Made Of Fire -Resistant Materials Such As Aramid Fibers (For Example, Kevlar). Provide Protection Against High Temperatures, Open Flame And Thermal Radiation. Color: Dark Yellow (Or Sand), With Reflective (Reflective) Stripes 2. The Helmet Is Equipped With A Protective Visor And A Nachnik For The Neck. Designed To Protect The Head From Mechanical Damage, Thermal Influences And Falling Objects. 3. The Gloves Are Made Of Heat -Resistant And Fireproof Materials. Provide The Protection Of Hands From Burns, Cuts And Other Injuries. 4. Shoes Are Fireproof Boots With Anti -Slip Sole And Protection From Punctures. Reliably Protect The Feet From Thermal And Mechanical Exposure. 5. The Respirator Or Respiratory Apparatus Is Designed To Protect The Respiratory System From Smoke, Toxic Gases And A Lack Of Oxygen. Provides The Ability To Safely Work In A Smoky And Dangerous Environment. Please Coordinate The Goods With The Customer., Sleeve On A Fire Truck-A Sleeve Of The Fireman Rpm-77-1.6 Gr-80-2 Pcs. , Frost-Resistant Standard, Rpm (C) -1.6-Uhl1. Fire Sleeve With An Internal Waterproofing Layer. In The Manufacture Of These Sleeves, A Layer Of High -Quality Waterproof Material Is Used. It Provides An Even Water -Repellent Surface Inside The Sleeve. The Sleeve Is Resistant To Atmospheric Exposure. A Diameter Of 77 Mm. Length 20 M. Working Pressure 1.6 Mpa., The Manometer On The Fire Device (Apa) Is A Device For Monitoring The Pressure Of Compressed Air In The Cylinder And Ensuring The Safety Of The User. It Is Located On The Shoulder Belt, Has A Photoluminescent Dial And Serves To Timely Notify The Emergency Balance Of Air, Helping The Fireman Monitor Reserves And Avoid Dangerous Situations. Please Warm Up The Goods With The Customer