Quotation Are Invited For Insitu Seat Ring Replacement Of Block 20 Hp/Lp A Prds Control Valve

Quotation are invited for 1-Insitu Seat Ring Replacement of Block 20 HP/LP A PRDS Control Valve. TECHNICAL AND GENERAL SPECIFICATION OF OUTSOURCING WORKM STATION, JEBEL ALI POWER STATIONTITLE: INSITU SEAT RING REPLACEMENT OF BLOC K 20 HP/LP # A PRDS CONTROLVALVE; SIZE: 20 IN, MAKE: CCIQTY: 01 NO.DURATION: 04 DAYS.SCHEDULE & DURATION:##WORK TO BE DONE DURING BL OCK 20 OUTAGE WHICH IS TENTATIVELY PLANNEDTO START FROM 20.01.2026##THIS IS A TENTATIVE SCHEDULE, IF THERE ARE ANY CHANGES, IT WILL BEUPDATED ACCORDINGLY.A.#SCOPE OF WORK##MOBILIZE MEN/EQUIPMENT WITHIN 02 DAYS OF ADVANCE NOTICE.##GET PTW (PERMIT TO WORK) AND LC (L INE CLEARANCE) DOCUMENT FROM DEWA.##THE FOLLOWING DOCUMENTS TO BE SUBMITTED TO GET PTW,O#METHOD STATEMENT.O#RISK ASSESSMENT OF THE W ORK.O#TOOL BOX TALK REPORT.##ENSURE AREA IS CORRECTLY SECURED AND SAFE TO WORK IN ALL ASPECTS.##CONDUCT SITE SURVEY AND SAFETY INSPE CTION TO ASSESS THE WORKINGENVIRONMENT.##IF THE WORKING ENVIRONMENT IS SAFE, THEN PROCEED WITH THE FOLLOWINGSTEPS.##MARK THE PARTS O RIENTATION BEFORE DISMANTLING.##DECOUPLE AND REMOVE THE ACTUATOR.##DISASSEMBLE THE VALVE INTERNALS.##INSTALL INLINE BORING MACHINE A ND CUT SEAT SEAL WELD AND PULL-OUTEXISTING SEAT.##GRIND AND CLEAN THE WELDED AREA TO INSERT A NEW SEAT.##INSTALL NEW SEAT RING & PRE PARE FOR WELDING.##PREHEAT THE SEAT / BODY WELDING AREA. (HEATING ARRANGEMENT &TECHNICIAN WILL BE PROVIDED BY DEWA)##WELD THE SEAT O N THE BODY AS PER APPLICABLE WPS BY OEM. (WELDER WILLBE PROVIDED BY DEWA)##CHECK / BLUE MATCH THE SEAT RING & PLUG CONTACT AREA.##CA RRY OUT LAPPING IF REQUIRED.##RE ASSEMBLE THE VALVE, MOUNT ACTUATOR, CALIBRATE AND STROKE TEST.##DEWA ENGINEER SHALL BE CONSULTED IN CASE OF ANY INDICATION OF DAMAGE.##REPLACEMENT OF SPARES SHALL BE DECIDED DURING THE JOINT INSPECTION.##ALL BOLTS & NUTS NEED TO BE CLEANED AND LUBRICATED.##THE FLANGE BOLTS ARE TO BE TORQUE TIGHTENED.##HOT TIGHTENING OF THE BOLTS TO BE DONE AFTER STARTUP.##FINAL INSPECTION SHALL BE DONE BY DEWA PERSONNEL.##IMI CCI SERVICE SPECIALIST/ENGINEER TO BE ASSIGNED FOR THE JOB.##03 SKILLED HELPERS WI LL BE ASSIGNED BY DEWA TO CARRY OUT THE JOB.##IMI CCI SERVICE SPECIALIST/ENGINEER HAS TO COMPLETE THE JOB WITHINTHE TARGET TIME.##DE -MOBILIZE MEN AND EQUIPMENT AFTER COMPLETION OF THE JOB.##INSPECTION & MAINTENANCE REPORT TO BE SUBMITTED TO DEWA. INSPECTIONREPORT WITH PHOTOS TO BE PROVIDED.##SEAT CUTTING MACHINE AND RELATED TOOLS ARE IN CONTRACTORS SCOPE.##PROPER AND TESTED TOOLS TO BE USED.# #ALL LIFTING & POWER TOOLS SHOULD BE WITH A VALID TEST CERTIFICATE.##THE CONTRACTOR SHALL VISIT THE SITE AND BE FULLY FAMILIAR WITH THEWORK SCOPE BEFORE SUBMITTING THE BID.##DEWA SCOPE:O#SPARES#O#WELDER WITH WELDING MACHINEO#SCAFFOLDING ERECTION AT SITEO#03 SKILLE D HELPERS.B.#WARRANTY##THE WARRANTY PERIOD FOR THE WORK SHALL BE ONE YEAR FROM THE DATE OFCOMPLETION OF WORK CERTIFIED BY DEWA. Qty: 1 1-Insitu Seat Ring Replacement of Block 20 HP/LP A PRDS Control Valve; SIZE: 20 IN, MAKE: CCI IMI CCI Service Specialist/Engineer to be assigned for the job. (scope of work attached) contact: shabbir.enulhaque@dewa.gov.ae STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332502282)/$value

Refer document

FileName	File Description
Global Tender Document	Tender Notice