Tenders Are Invited For Carpentry Installation Work - Carpentry Work 1, Interior Doors

Carpentry Installation Work - Carpentry Work 1, Interior Doors. As Part Of The New Building Of A Professional School Center In Pfarrkirchen, A Four-Storey School Building Made Of Reinforced Concrete Is Required As A Supporting Plate Construction And Four Factory Attachments In A Monolithic Construction Made Of Reinforced Concrete. The Workshop Buildings Are Single -Storey In Sub -Areas And Three -Storey In Partial Areas. The Buildings Are Installed On A Slope. The Excavation Pit Has Already Been Excavated And Construction Work Is Carried Out. Supports Are Planned In Town Concrete, Walls In Town Concrete, In The Facade Area, Parapets From Semi -Finished Parts Between Supports Are Provided Via Individual Concrete Sections. In The School Building, The Reinforced Concrete-Precast Fabric Elements And Tin Elements Are Placed As Cladding In Some Areas. The Floor Slabs Of The School Area And The Workshop Building Are Currently Completed. A Logistics Building, Which Is Also Intended On The Building Site And Partly Taking Place At The Same Time, Was Already Completed In The Shell. The Following Services Are Necessary To Create The Interior Doors At School, In The Workshops 1-4. The Type And Scope Of The Performance (Essentially): A) Wooden Doors With Hpl Coated With Steel Bypass Frames: 1-Winged Door Width 0.76 To 1.26 M X Height 2.135 To 2.385 M Approx. 140 St Of It With Frost From Non-Rusting Stainless Steel: Approx. 19 St B) Wooden Doors Coated With Real Wood Veneer 1-Winged Door Width 1.01 To 1.135 M X Height 2.135 To 2.385 M Approx. 92 St 1-Winged Door With Fixed Side Part Width 1.51 To 2.01 M X Height 2.385 M Approx. 68 St 2-Winged Door Width 1.51 To 21.885 M Approx. 18 St 1-Winged Sliding Door Width 1.51 X Height 2.385 M Approx.