Tenders Are Invited For Construction Work-2025-0607 Planning, Production, Assembly And Commissioning Of A Pontoon Bridge Over The Inner Port Of Duisburg

Construction Work-2025-0607 Planning, Production, Assembly And Commissioning Of A Pontoon Bridge Over The Inner Port Of Duisburg. The Client (Ag) Assumes That The Total Measure Is Subdivided Into Two Significant Construction Phases, Which Depends On The Technical Solutions Of The Bidder / Contractor. For The Construction Phase 1, The Main Bridge Is Installed In The Inner Port After The Work Of The Factory, Then Blurred To The Specific Lying Area Of ​​The Ponton Bridge And Connected To The Already Covered Flat Anchors As Longitudinal And Cross-Stop. In The Construction Phase 2, The With Final Bridge Parts (After Positioning And Anchoring The Main Bridge In The Inner Port See Construction Phase 1) Are Closed Onto The Main Bridge Onto The Main Bridge And On The Land Side On The Already Pre-Assembled Steel Sliding Plates. The Following Subdivision In Construction Phases Is Therefore A Possible Solution. It Is The Task Of The Bidder To Develop An Optimized Construction Process, If Necessary In Just One Construction Phase. - Execution Planning Including The Evidence Of Swimming Stability And Anchor Festival- Testing Of The Execution Planning By A Test Engineer Selected By The Bidder And With Appropriate Approvals As Well As An Expert For Swimming Stability- River Anchor On The Ground Of The Internal Harbor, So That Events Such As Dragon Boot Regalata, Use In The Inner Port, Etc. Are Possible- Production Of Resistant Plates On Land Side (Possibly Weatherproof Steel) And Support Of The Final Bridge Parts, Assembly Main Bridge And The Articulated End Bridges In The Inner Port - Equipment With Independent, Solar -Powered Handrail Lighting And Power Storage For Nighttime Time - Commissioning