Bids Are Invited For Acquisition Of Paad Pipes And Connections And Machines And Equipment For Welding By Electrofusion In Hdpe Connections

Hdpe, Pe 100, 110Mm (Sdr 11 - Pn 16) For Water Network (Nbr 15593) In 50 Meters Roll. Included Flange (Din) In Hdpe, 140 Mm (Sdr 11 - Pn 16) For Water Network (Nbr 15593), 140Mm (Sdr 11 - Pn 16) For Water Network (Nbr 15593), 10/09/2025, 160 Mm (Sdr 11 - Pn 16) For Water Network (Nbr 15593), 160Mm (Sdr 11 - Pn 16) For Water Network (Nbr 15593), 200 Mm (Sdr 11 - Pn 16) For Sewage Network (Nbr 15593), 45 ° Knee For Electrophusion, 110 Mm (Sdr 11 - Pn 16) For Water Network (Nbr 15593), 90 ° In Electroprofusion, 110Mm (Sdr 11 - Pn16) Water (Nbr 15593), 90 ° In Electrofusion, 140Mm (Sdr 11 - Pn16) For Water Network (Nbr 15593), 160Mm (Sdr 11 - Pn16) For Water Network (Nbr 15593), From 200Mm (Sdr 11 - Pn16) For Sewage System (Nbr 15593) Electrofusion, De63x20mm (Sdr 11- Pn16) (Nbr 15593), Hdpe (High Density Polyethylene); Double Wall, Being:- Corrugated External Wall For Greater Mechanical Resistance- Smooth Inner Wall, Facilitating Flow Of Fluids; Indicated For Application To Rain Drainage Systems And Sanitary Sewage; Integrated Elastic); Nominal Diameter: Dn/Di 300 Mm; Supplied In 6 Meter Long Bars; Facilitating Flow Of Fluids; Indicated For Application In Rain Drainage And Sewage Systems; Ends With Jei -Type Fitting (Integrated Elastic Joint); Nominal Diameter: Dn/Di 400 Mm; Fluid Flow; Suitable For Application In Rain Drainage And Sewage Systems, Ends With Jei -Type Fitting (Integrated Elastic Joint); Nominal Diameter: Dn/Di 500 Mm; Supplied In 6 Meters Long Bars;, Facilitating The Flow Of Fluids; Indicated For Application In Rain Drainage Systems And Sanitary Sewage; Integrated Elastic); Nominal Diameter: Dn/Di 600 Mm; Supplied In Bars 6 Meters Long;, Facilitating The Flow Of Fluids; Indicated For Application In Rain Drainage And Sewage Systems; Ends With Jei -Type Fitting (Integrated Elastic Joint); Nominal Diameter: Dn/Di 800 Mm; Electrofusion Weld For Hdp1 Pipes. Minimum Specifications 1.1. Nomenclature1.1.1. Welding Machine For Applying Voltage Or Current Or Power Output Parameters And Time To Run The Welding Cycle, As Specified By The Electrophusion Connections Manufacturer In Hdpe.1.2. Specifications Untilment Technique: Controlled Voltage  Lv (Lv (Low Voltage)]: 220 Vac ± 15% Operation Frequency: 60 Hz ± 10% Welding Termination: 8 To 48 V  Melting & Gt; 50 A Maximum Consumed Power: 4,000 W Using Power Plug: Brazilian Type Following Nbr 14.136.  External Dyers Of The Minimum Connections Served: & Lt; = 32 A & Gt; = 350 Mm  Fusion Data: Bar Code Reader And Manual Users: Against Short Circuit And Overload  Output Circuit: Unpaid Resistance With Output Resistance. & Gt; 200Ω  Protection Grau: Ip54  Usb Solder Information Record With Cable, Software And Cable.