Request For Quotation 04. Personal Protective Equipment (Z.727) (Department Of As)

Igi. Boots For Protection Against Low Temperatures, Male, Made Of Combined Material, Insulated. The Boots Are Made By Direct Casting Of Polyurethane And Thermoplastic Polyurethane To Harvest The Top Of The Shoes. As Materials For The Top Of The Shoes, Genuine Skin Is Used With A Thickness Of 1.8–2.0 Mm. The Boot Is Not Less Than 29.5 Cm High, Adjusted In Width With A Fastener On A Buckle, A Leather Valve. The Lining Is A Multi-Layer Insulation-Artificial Fur On A Knit-Based Basis With Woolen Pile (70% Fiber Wool, 30% Fiber Polyester, Density 640 G/Sq.M, Pile Height 14 Mm), Sheller U-200 With A Metallized Film. In The Heel Part, A Pocket From A Lining Cut With A Gasket Made Of Non -Woven Material. Settlement Insole From Multi -Layer Insulation. There Is A Finish Made Of Retroreflective Material. To Protect In The Nasal Part Of The Foot, Internal Protective Socks From Composite Material With A Shock Strength Of 200 J (Moon 200) With A Gasket That Prevents The Pressure Of The Upper Edge On The Foot. The Sole Is Two -Layer Oil -Zoom -Resistant (Resistant To Chemical Factors - Oil, Oil Products). The Upper Layer Of Polyurethane Has Shock -Absorbing Properties, Extinguishes Shock Loads, And Also Gives Shoes Lightness, Comfort And Increased Heat -Protective Properties. The Lower Layer Is Made Of Wear -Resistant, Heat -Resistant, Frost -Resistant (–40 ° C ...+120 ° C) Of Thermoplastic Polyurethane, Which Is Resistant To Deformation, Abrasion. The Depth Of The Profile (Tread) Of The Rush Layer Of The Sole Of 4.5 Mm Provides Protection Against Gliding Along The Healing Surfaces, And The Tread Pattern Located At An Angle Provides Self -Purification Of The Sole From Pollution. Color: Black. Dimensions: 40 - 1 Pair, 41 - 3 Pairs, 42 - 4 Pairs, 43 - 5 Pairs, 44 - 3 Pairs, 45 - 3 Pairs, 46 - 1 Pair, 47 - 1 Pair. Gost 28507-99. Certificate.