Request For Quotation Acquisition Of Goods

Tad-17I Transmission Oil, 200 L. The Type Of Oil Is Mineral. The Volume Of Fluid Is 200 Liters. Universal Mineral, Contains A Multifunctional Sulfur-Foster-Containing, Depressor And Antipenic Additives. Physico-Chemical Indicators: Kinematic Viscosity At 100 ° C Mm 2/S Not Less Than 17.5. Density At 20 ° C (Not More Than 0.907). The Flash Temperature In An Open Tigl ° C, Not Lower Than 200 ° C, The Solidification Temperature Is Not Higher Than -25 ° C., Motor Oil For Diesel Engines M-10Dm, 205 Liters. Characteristics And Description Engine Appliance - Four -Stroke Type Of Oil - Mineral For The Type Of Engines - Diesel Application By Type - Universal Vasic Vasic By Sae - 0W -30 Fluid Volume - 205 Liters Energy -Saving Oil - Yes Api Standard - Cd A Universal Lubricant System With A Low Degree Of Ash Content. The Product Is Made On The Basis Of Distillate And Residual Components Of Oil With Sulfur Compounds With The Addition Of Additives To Improve Operational Characteristics. The Use Of M-10Dm To Protect The Api Cd Diesel Engines And Lower In The Summer Period Is Recommended. Category Of Viscosity Of The Product Sae 30., Digital Span Tester Measures The Voltage Up To 600 B. Current Ticks (Multi-Northwest) For Measuring Constant And Alternating Voltage, Alternating Current, Diode Resistance, Temperature (C And F), Etc. Technical Characteristics: Lcd Display Maximum Value Of At Least 4099. Polarization Display: Automatic. Overload Display: “Ol” Or “-Ol”. Signaling Consumes Batteries: Yes. Accuracy: If The Measured Cable Is Not Located At The Central Point Of The Jaw Can Cause A Small Dimension Deviation ± 1.0%. Corps Strength: Withstands A Drop From A Height Of 1 M. The Maximum Opening Of The Jaw: At Least 28 Mm. The Maximum Cross Section Of The Measuring Pipe: At Least 28 Mm. Power: 2 X Aaa 1.5V. Summary: Current Ticks, Measuring Cables Cat Ii 1000V, Temperature Sensor Like K, 2X Aaa Battery, Case For Carrying With Pockets. Dimensions: At Least 240X45x150 Mm. Weight Of At Least 445.0 G., Knitting Wire 1.2 Mm, Steel Brand - St3, Marking - Then, Gost: 3282-74, Processed -Processed Thermal. It Is Used In Construction, Industry And Economy As A Fastening Element For Concrete Structures And Fastening Of Reinforcing Elements., Emal Pf-115 Gost 6465-76 Blue Pentifal 25 Kg. Type Of Use - Universal. Type Of Painted Material - Metal, Wood, Concrete, Plaster, Brick. The Base Of The Paint Is Alkyd, The Color Is Blue. Drying Time Is 24 Hours. Packing Of Material 25 (Kg), The Degree Of Shine Is Glossy., Emal Pf-115 Gost 6465-76 Red Pentifal 25 Kg. Type Of Use - Universal. Type Of Painted Material - Metal, Wood, Concrete, Plaster, Brick. The Base Of The Paint Is Alkyd, The Color Is Red. Drying Time Is 24 Hours. Packing Of Material 25 (Kg), The Degree Of Shine Is Glossy., Emal Pf-115 Gost 6465-76 Gray Pentifal 25 Kg. Type Of Use - Universal. Type Of Painted Material - Metal, Wood, Concrete, Plaster, Brick. The Base Of The Paint Is Alkyd, The Color Is Gray. Drying Time Is 24 Hours. Packing Of Material 25 (Kg), The Degree Of Shine Is Glossy., Emal Pf-115 Gost 6465-76 Black Pentifal 25 Kg. Type Of Use - Universal. Type Of Painted Material - Metal, Wood, Concrete, Plaster, Brick. The Base Of The Paint Is Alkyd, The Color Is Black. Drying Time Is 24 Hours. Packing Of Material 25 (Kg), The Degree Of Shine Is Glossy., Polypropylene Du25x4.2Mm Pipe. The Outer Diameter Is 25 Mm. A Pipe With Fiberglass Pn20 Reinforced For The Installation Of Cold And Hot Water Supply And Hot Water Pipelines, Heating. Reinforced With A Fiberglass Of Three Layers, The Inner And Outer Layer Is Polypropylene, And The Inner Intermediate (Reinforcing) Layer Is A Mixture Of Fiberglass And Polypropylene. Method Of Connection - Soldering. Color Is Gray., The Transition Of Pe Compression With The Internal Thread Pn16 Du-40/20Mm. The Attention Of Suppliers: The Required Size Is Indicated In The Additional Characteristic (Description) Of Goods, Works And Services, The Transition Of Pe Compression With The Internal Thread Pn16 Du-40/25Mm., The Transition Of Pe Compression With The Internal Thread Pn16 Du-40/32Mm., The Transition Of Pe Compression With The Internal Thread Pn16 Du-50/20Mm. The Attention Of Suppliers: The Required Size Is Indicated In The Additional Characteristic (Description) Of Goods, Works And Services, The Transition Of Pe Compression With The Internal Thread Pn16 Du-50/25Mm., E1508 1.5Mm2c Gilse Tip With An Isolated Flange (Yellow 10, Red 10, Blue 10 Pcs). Materials: Isolation - Pvc (Polyvinyl Chloride), Tips -Gilses - Brass Purpose - For Finishing Multi -Core Flexible Wires And Connecting Them To Contact Clamps Of Various Electrical Equipment.