Quotation Are Invited For Fuel And Lubricants

Quotation are invited for Fuel and Lubricants Delivery Date: 2025/09/26 Delivery To: Water Services Delivery Address: 12 Hertzog Boulevard, Cape Town Closing Date: 2025/09/12 Closing Time: 04:00 PM Description: 10 each x supply 20 ltr shell omla s2 gx 220 oil 10 each x supply 18kg shell gadus greases Specification: * Supply 20 Ltr Shell Omla S2 GX 220 Oil or equivalent Shell Omala S2 GX 220.20ltr Oil Specification for industrial gear oil Suitable for heavily loaded enclosed gearboxes and bearings. Should withstand high thermal loading and resist formation of sludge. Density @ 15 °C: 899 kg/m³. Viscosity Index - 98 Viscosity @ 40 C - 220mm2/s Viscosity @ 100 C - 19.0 - 19.4mm2/s Designed for extreme-pressure (EP) conditions Shell Omala S2 GX oils are high quality extreme-pressure oils designed primarily for the lubrication of heavy duty industrial gears. Their high load carrying capacity, protection against micropitting and compatibility with seals and paints, combine to offer excellent performance in enclosed gear applications. Long life oil - Maintenance saving. Excellent wear and corrosion protection Att Adolf / Leon 4443382 Delivery Athlone Waste Water Plant Jan Smut Drive.( Workshop ) * Shell Gadus S2 V220 greases 18kg or equivalent Specification for Grease High performance and Multi-purpose extreme-pressure (EP) grease. Suitable for heavy-duty bearings and general industrial lubrication. Ideal for rolling and plain bearings, hinges, and sliding surfaces across numerous industrial and transportation applications. Must have Lithium hydroxy stearate soap as the thickener. Base oil to be high-viscosity mineral oil Operating Temp range: -20 °C to +100 °C (intermittent up to ~120 °C) NLGI Grade: 2 (medium/firmer, like peanut butter). IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words or equivalent. CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/309221

Refer document

FileName	File Description
Global Tender Document	Tender Notice