Tenders Are Invited For Radiation Monitors – Development And Assembly Of Radiation Monitoring System (Commodity Codes Js07, Js21, Js22, Js23, Js24) For Ap 1000® Project - Unit 1, 2, 3

Radiation Monitors – Development And Assembly Of Radiation Monitoring System (Commodity Codes Js07, Js21, Js22, Js23, Js24) For Ap 1000® Project - Unit 1, 2, 3. The Js07 Radiation Monitoring System Is A Standalone Plant Support System Monitoring Process, Effluent, Airborne, And Area Monitor Radiation Conditions Through The Use Of Radiation Detectors And Dedicated Local Radiation Processors. Js07 Is Classified As Safety Related, Seismic Category I, And Westinghouse Safety Class C With Some Safety-Related Functions And Some Non-Safety Related Functions. The Js07 Scope Is One Of The Largest And Most Complex Instrumentation And Control Systems For Procurement. Js07 Is A Completely Distributed Plant System, With 38 Distinct Radiation Monitors, 6 Of Which Being Safety Related, With The Control Software Being Fully Integrated Into The Overall Ap1000 I&C Architecture. Consideration Of Potential Suppliers Includes The Following System/Project Criteria And Capabilities: - Experienced Manufacturers/Assemblers Capable Of Fabricating And Furnishing Ap1000® Radiation Monitoring Compatible Equipment (Described Below), Must (I) Contact (Email And/Or Phone Call) The Westinghouse Contact Person Identified In Section 1 To Express Interest And Request An Ap1000 Supplier Qualification Questionnaire, And (Ii) Upon Receipt, Complete The Ap1000 Supplier Qualification Questionnaire With Sufficient Detail For Westinghouse Evaluation And Return It Via Email To The Westinghouse Contact Person. If There Are Any Questions Or Clarifications Needed, Please Reach Out To The Contact Person Listed Above. - The Qualification Criteria Shall Be Included In The Ap1000 Supplier Qualification Questionnaire, Examples Thereof Include Demonstration Of: - The Supplier Shall Provide, As Part Of The System Supply, Engineering Consultation To Assist The Purchaser With System Design Finalization And Provide Engineering Support To Assist With The Installation Interface Design. - The Supplier Shall Be Responsible For Furnishing The Safety-Related (Class 1E) And Non-Safety Related (Non-Class 1E) Process, Effluent, Airborne And Area Monitors Radiation Monitoring Equipment As Identified In The Rms System Specification Document (Provided Upon Completion Of Questionnaire And Nda [See Below]). - The Supplier Shall Furnish The Communication, Power, And Signal Cables Internal To The Radiation Monitoring System Within The Supplier’S Scope Of Supply. - The Supplier Shall Furnish The Inside Containment Cables For The Containment High Range Systems. These Are Qualified Class 1E For Harsh Environment. - The Supplier’S Scope Of Supply Includes Design, Manufacturing, Documentation, Test Plans, Test Procedures, Project Management, Quality Assurance, Equipment Qualification, Cleaning, Packaging, And Shipment Of The Equipment. - The Supplier Shall Be Responsible For Performing Project Management And Generating Project Status Reports/Meetings For Each Unit. - The Supplier Shall Provide Time And Material Rates For Site Startup And Acceptance Testing Support. - The Supplier Shall Provide Sample Line Deposition Analysis For The First Unit. All Subsequ

Refer document

FileName	File Description
Global Tender Document	Tender Notice