Request For Quotation Acquisition Of Other Reserves

The Automatic Circuit Breaker In The Iek Vid88-35 Housing Is Located In The Iek 250A 35K Sva30-3-0250 Gost Iec 60934-2015, Designed For Current In Normal Mode And Shutting Off The Current During Short Circuits, Overload, Unacceptable Voltage Reductions, As Well As For Operational Inclusions And Disagreements Operation In Electrical Installations With A Nominal Operating Voltage Up To 400 V And On Rated Currents From 12.5 To 1600 A. The Rated Current 250 A, The Number Of Poles 3 Nominal Disconnecting Capacity Of Icu At 400 V, 50 Hz 35 Ka, Nominal Operating Voltage 400 V, Energy Loss150.0 W, The Number Of Auxiliary Switching Contacts-0,, Built-In-None Motor Drive, No, Type Of Connection Of The Power Electric Circuit Screw Connection, Network Frequency 50 Hz, Type Of Connection Of The Main Electric Circuit Other, The Range Of The Score Of The Release Of The Release 2500 A, The Design Of The Device Is The Adjustable Expansion Device, Motor Drive - Additionally Yes, The Presence Of An Electronic Substrate Is Not, Nominal Pulsed Withstanding Voltage-8 Square Meters, Rated Voltage 400 ... 400 V, Nominal Prolonged Current Iu-250 A The Nominal Worker Is The Greatest Disconnecting Capacity Of The Ics-25 Ka, Suitable For Installation On The Din-Rako-No, With A Spacing Under Voltage, Yes, The Degree Of Protection Is Ip-Ip30, The Type Of Control Element Is A Toggle Switch. Coordination With The Customer And The Provision Of A Certificate Is Mandatory!, Aluminum Tips A 35-10-8, Gost 9581-80, Cable Aluminum Tips, Fixed By Crimping, Are Designed For Ending The Wires And Cables With Aluminum Cords From 16 To 240 Mm?. Tips Are Made Of An Aluminum Pipe. Destination-Cable Up To 10 Square Meters. The Installation Method Is Vile. The Area Of ​​The Cross Section Is 35 Mm. Coordination With The Customer And The Provision Of A Certificate Is Mandatory!