Salnic Stuffing Agi 10X10 Mm. Stuffing Oilcolor Agi. Asbestos, Wicker, Glued With Graphite, Inhibited. To Fill In The Salted Chambers In Order To Seal The Moving And Motionless Connections Of Various Machines And Devices Operating In Different Environments With The Acidity Of The Working Environment (Ph) 4-14. Working Media: - Air, Nitrogen, Inert Gases: Pressure Up To 20 Mpa, T To + 325 C, Sliding Speed Up To 2M/S., - Water Vapor: Pressure Up To 35 Mpa, T To + 565 C, Sliding Speed To 2M/S., - Petroleum Products: Pressure Up To 32 Mpa, T Up To + 450 C, Sliding Rate Up To 2 M/S., - Water, Nutrient Water, Organic Products: Pressure Up To 2 Mpa, T ° Up To + 70 ° C, Sliding Speed Up To 2M/S, Sliding Speed To 15 M/S When The Pumps Are Compacted., - Ammonia Liquid And Gas -Shaped: Pressure To 32 Mpa, T From -70 To -70 To -70 To -70 To -70 To -70 To -70 To -70 To -70 To -70 + 150 C, Sliding Speed Up To 2M/S During The Seal Of The Reinforcement, Sliding Speed Of Up To 15 M/S During The Seal Of The Pumps. - Liquid And Gaseous Petroleum Products And Aggressive Media Pressure Up To 37 Mpa, T Up To + 600 C, In Fixed Joints Of The Devices. Material - Graphite, Max. Temperature - 600 ° C. Gost 5152-84., Salnic Stuffing Agi 8X8 Mm. Stuffing Oilcolor Agi. Asbestos, Wicker, Glued With Graphite, Inhibited. To Fill In The Salted Chambers In Order To Seal The Moving And Motionless Connections Of Various Machines And Devices Operating In Different Environments With The Acidity Of The Working Environment (Ph) 4-14. Working Media: - Air, Nitrogen, Inert Gases: Pressure Up To 20 Mpa, T To + 325 C, Sliding Speed Up To 2M/S., - Water Vapor: Pressure Up To 35 Mpa, T To + 565 C, Sliding Speed To 2M/S., - Petroleum Products: Pressure Up To 32 Mpa, T Up To + 450 C, Sliding Rate Up To 2 M/S., - Water, Nutrient Water, Organic Products: Pressure Up To 2 Mpa, T ° Up To + 70 ° C, Sliding Speed Up To 2M/S, Sliding Speed To 15 M/S When The Pumps Are Compacted., - Ammonia Liquid And Gas -Shaped: Pressure To 32 Mpa, T From -70 To -70 To -70 To -70 To -70 To -70 To -70 To -70 To -70 To -70 + 150 C, Sliding Speed Up To 2M/S During The Seal Of The Reinforcement, Sliding Speed Of Up To 15 M/S During The Seal Of The Pumps. - Liquid And Gaseous Petroleum Products And Aggressive Media Pressure Up To 37 Mpa, T Up To + 600 C, In Fixed Joints Of The Devices. Material - Graphite, Max. Temperature - 600 ° C. Gost 5152-84., Len Plumbing Ssk No. 11 Of The Armed Forces Gost 10330-76. Garbage. Plumbing Linen - For Sealing Threaded Connections. Higher Grade. A Pure Natural Product Made Of Thin, Homogeneous, Long -Fiber, Scratch Linen Obtained From The Linen Stem., Pil (Pvc-L) Tape For Winding Gas-Neftsoproducts As An Isolation And Protective Coating, For Protection Against Corrosion Of The Outer Surface Of The Main Gas-Neft-Products During Construction, Repair, As Well As For Waterproofing Of Heat Pipes. It Is Used In The Installation And Repair Of Pipelines. The Tape Has No Holes, Bubbles, Cracks, Passes Of The Adhesive Layer Along The Entire Area And Tears On The Edges. The Glue Layer When Rewinding The Roll Does Not Exfoliate And Does Not Go To The Other Side Of The Tape. The Surface Of The Roll Is Smooth. The Tape Made Of Polyvinyl Chloride Composition Of The Roller Calendering With The Application Of The Adhesive Layer On One Side. The Ribbon Of Saws (Pvc-L) Meets Strict Technical Standards And Has The Following Characteristics: Color: Blue, Black. Strapery Strength: At Least 80 N/Cm. Relative Lengthening In Rupture: At Least 160%. Sticky: At Least 25 Seconds. Fragility Temperature: Not Higher Than -30 ° C. Electric Resistance: At Least 1 × 10¹¹ Ohms/Cm. Water Absorption: No More Than 0.5% For 1000 Hours At A Temperature Of 20 ° C. The Width Of The Tape: At Least 150Mm, No More Than 450 Mm. Tape Thickness: At Least 0.4 Mm. Length In Bobin: At Least 100 ± 0.5 P/M. The Year Of Release Was No Earlier Than 2025., Technical Plastin 5 Mm (1000X5000 Mm, ~ 41.1 Kg). Characteristics And Description Type - Non -Forming Technical Plastins. The Condition Of The Product Is New Thickness: 5 Mm (± 0.9 Mm), Tmksch - Heat -Sea Class: 2 - Working Pressure Up To 0.1 Mpa The Degree Of Hardness: 65 Units Of Shore A (± 5 Units) Type: H - A Non -Forming Plate Made On Continuous Volcanic Type: I - Rubber Plate Weight 1 Sq.M.: At Least ~ 8.0 Kg Technoplastine Is Designed For The Manufacture Of Rubber Products That Serve To Compact Motionless Compounds, Prevent Friction Between Metal Surfaces, For The Perception Of Single Shock Loads, As Well As As Gaskets And Floorings Working Environment: Air Of Premises, Containers, Vessels; Nitrogen; Inert Gases; The Water Is Fresh, Sea, Industrial, Sewage Without Organic Solvents And Lubricants; A Solution Of Salts With Concentration To The Limit; Acids And Alkali With A Concentration Of Not More Than 20%. He Is Working At From -30 ° C To +80 ° C. Appearance: The Surface Is Smooth, Black
