1. The Subject Of The Public Contract Is The Development Of Project Documentation For The Task Entitled Construction Of Owsiana Street In Bielsko Podlaski - Project Documentation. 2. The Scope Of The Study Includes: 1) Construction Of Surfaces: Roadway, Conventions, Pedestrian Pavements, 2) Vertical And Horizontal Marking Of The Entire Range, 3), If Necessary-Reconstruction Of The Existing Technical Infrastructure, Conflicting With Designed Elements Of The Road Lane, 4) Construction Of A Rainwater Sewage System For Dehydration Of Hardened Surfaces, 5) Execution Of Water Connections. To The Boundaries Of Real Estate Within The Road Lane, 6) Execution Of Water And Sewage Connections To The Newly Marked Boundaries Of Real Estate Within The Road Lane (Widening The Road Lane), 7) Execution Of The Exits Of Water Supply And Sewage Networks To Plots Constituting Private Roads, 8) Construction Of A Street Lighting Network Throughout The Entire Range, Taking Into Account The Lighting Of Pedestrian Crossings, Taking Into Account The Following Entries:- Design In Accordance With The Guidelines For The Construction Of Electricity Equipment, Applicable Regulations, Sep-E-004: 2004, Pn-En 13201,-Design In Accordance With Pge Dystrybucja, Bielsk Podlaski Energy Region,-Predict The Use Of Aluminum Street Lighting Poles, Gray-Colored (Ci-63) With Additional Protection With Elastomer,-Predict The Design Of The Led Control Panel Equipped With Soft Start-3 Pcs, Network Analyzer, Type S Protection, Controller With An Antenna Gps/Gsm Compatible With Cpanet, Automatic Passive Power Compensators- (The Wardrobe Should Work With The Led Street Control And Management System Existing In The City Of Bielsk Podlaski, 9) Predict The Use Of Newly Designed Led Luminaires, Which Should: And Water Not Less Than Ip 66 For The Optical Part And The Supply System,- Have A Body Made Of Aluminum Alloy Anodized In Gray (Ci-63),- Have Elements Fastening The Luminaire On The Pole, Boom (Screws, Pads) Made Of Stainless Steel And Guaranteeing Stable Assembly,- Have A Led Panel Equipped With A Diode With A Diodes With A Diodes With A Diode With A Diodes Lights 4000 K +/- 200 K And With A Color Rendering Indicator Ra Min. 70,- To Be Equipped With A Group Of Lenses Shaping By Sending Road Lights; Each Diode On The Led Panel Should Have An Individual Optical Element With The Same Characteristics, So That In The Event Of Burn Out One Of The Diodes, Only A Light Stream Emitted By The Binding Changes And Not Its Lights (Not Spreads The Light (It Should Be Maintained Evenly Lighting On The Entire Surface Of The Illuminated Road),- Made In The Second Class Of Protection,- Have A Photobiological Class Min. 1,- Power Factor> 0.95,- Operating Temperature Range: -400C ≥ Is ≥ 400,- Disruptions Of The Thd Network Thd <20%,- Have A Programmable In Two Compartments, An Autonomous Time Relay, At The Same Time Reducing The Light Stream Intensity Min. In Two Different Levels; The Autonomous Power Reduction Syste
