Tenders Are Invited For Construction Of The Distribution Water Supply Network In Rymanów Part 3

The Water Supply Network Is Intended To Be Made From Pe Pipes Ø160, Ø110, Ø90, 63, 40 Mm. A Technical And Technological Solution Was Designed To Minimize The Risk Of Emergency Situations. The Foundation Of The Water Supply Should Meet The Conditions For Pipelines Made Of Pe. Pe 100Rc Pipes Should Be Used In Accordance With The Pas 1075 Standard, Which Do Not Require The Use Of Sand Beds Laid In The Ground By Traditional And Narrowly Excavation And Trenchless Methods. Pipelines Should Be Laid According To Longitudinal Profiles, At A Minimum Depth Resulting From Standards, The Underground Water Supply Route Should Be Marked With A Pvc Foil With A Metallic Insert At A Depth Of 70 Cm Below The Area. The Water Supply Network Will Be Armed With Network And Noder Shutters As Well As Aerial Fire Hydrants With Shut -Off Bodies. Regulatory And Measuring Chambers Should Be Made On The Water Supply Network. The Scope Of Work Includes The Construction Of A Water Supply Network And Securing The Existing Underground Armaments Crossing The Designed Network. The Detailed Scope Of Work Is Presented In The Design Documentation, Land Ground Documentation, Technical Specifications And Bill Of Quantities. The Validity Of The Valuation Should Be Included In The Sections Only And Only The A Water Supply Profile (Profile A) Together With The Power Supply And Construction Of The Krp-1 Reduction And Measuring Chamber In Accordance With The Attached Construction Project, Technical Specification And Acceptance Of Construction Works