Bids Are Invited For Price Registration For The Acquisition Of Permanent Material To Meet The Needs Of The Municipality Of São José Do Campestre/Rn

0000622 - Steel Shelf 6 Shelves, Steel Shelf, Sheet Shelves 22 (Minimum Thickness Of0, 80Mm) And Columns In Plate 16 (Minimum 1.5 Mm Thickness), Minimum Height Of The Shelf Adjustment 25 Mm, Finished By The Chemical Treatment System (Anti -Ruginous And Phosphate) With Hot Baths With Hot Degreasing, Decapante, Phosphatization And Passivator, Painting Through Electrostatic System Cured In A Greenhouse Of At Least 180 ° C, With Plain And Uniform Surfaces, Containing 06 Shelves. The Columns In L Should Receive Plastic Shoes At Their Terminations In Contact With The Floor. Every Structure In Light Gray. Maximum Tolerance For Dimensional Measurement Variation (+ Or -) 3Mm. Present Together With The Initial Proposal Of Warranty Issued Exclusively By The Manufacturer, Certifying That The Minimum Warranty Is 01 Year, 0000623 - 4 Drawer File, Mdp Cluster File Top With A Thickness Of 18 Mm, Coated With Low Pressure Melaminic Laminate In Both Sides, Resistant To White, Pvc Ribbon 2, 5 Mm Thickness With High Impact Resistance. In Panel Color Table. Mdp Agglomerated Wood Drawers Coated With Low Pressure Melaminic Laminate Headed With Pvc Edge Tape With 1 Mm Thickness. Background Of The Drawers Made Of Hard Density Hard Sheet Painted In The Same Color As The Furniture. (Telescopic) Slides Of Drawers, Attached To The Drawers Body Through Wood Chipboard Screw, Effort Resistant On The Drawer And The Numbers Of Opening And Closing Cycles. Simultaneous Drawing Of Drawers Made Of Side -Resistant Steel Rod With Lateral Drive Through Lock With High Torque Resistance Internal Soul Key With An Injected Polyethylene Protection External Plastic Cover. Curved Design Handles And Soft Lines Without Polyurethane Injected Edges, Fixed With 4X25mm Steel Thermoplastics Screw With Pan With Pan Head. Supports For Suspended Pastes On The Drawers Made Of L -Shaped Steel Sheet Drawer Through 4, 0 X 14Mm Pan Chipboard Screws, Painted In Epoxy Powder In The Same Color As The Furniture. Maximum Tolerance For Dimensional Measurement Variation (+ Or -) 3Mm .. Present Together With The Initial Proposal Warranty Declaration Issued Exclusively By The Manufacturer, 0000624 - Straight Table, 18 Mm Mdp Straight Table In White With Edge Ribbon In The Top Of The Top. 15 Mm Mdp Front Skirt In White. With 15 Mm Mdp Drawer With Metal Slide And Plastic Handle. Steel-Finished Feet Structure By The Plate Chemical Treatment System (Anti-Ruginous And Phosphatizing) With Hot Successive Baths, Painting Through Electrostatic System Cured In At Least Green Greenhouse 180 ° C, Terminations With Black Shoes. Dimensions: 140 Cm In Length, 60 Cm Deep And 76 Cm High. Maximum Tolerance For Dimensional Measurement Variation (+ Or -) 5Mm. . Present Together With The Initial Proposal Of Warranty Issued Exclusively By The Manufacturer, 0000625 - Fixed Chair With Low Back, The Structure Is Made Up Of 1010/1020 Steel Tubes, Being The Feet And Supports Of The 16X30 Oblong Tubes And Back Tubes With 1, 5 Mm Thick And Welds To Two Horizontal Pipes Of 7/8 Steel Tubes With 1, 2 Mm

14,49,422 - BRL

FileName	File Description
Global Tender Document	Tender Notice