Nsh (Gear Pump) With A Worker V (Volume) 10 Cubic Centimeters, Issued Pressure In The Working Unit 21 Mpa, The Number Of Slots On The Shaft 4, Passed The Entire Processing Route According To The Technology, The Calculated Fluid Supply Is 22 L/Min., The Left Type Of Rotation, The Ns Is Attached To The Unit Using 4 Bolts Or Studs With Nuts. Code For No.: 0010L4 (Catalog Number) Application: It Is Used In The Steering Of Steering Tractors, Loaders And Excavators Based On Tractors Of Class 1.4 Vehicles, Beet And Feed Harvesters, Motor Graders And Other Machines, In The Main Hydraulic Systems Of Class Tractors Up To 0.6 Tf. It Has Minimal Overall Dimensions And Mass. Characteristics: • Work In The Substance, Cm3: 10 • Nominal Speed Of Rotation, From 1: 40 • Nominal Feed, L/Min: 21.0 • Output Pressure, Mpa: Nominal: 16 Maximum: 21 • The Feed Factor, At Least: 0.92 • Nominal Power, Kw: 8.6 • Mass, Kg: 2, Division Of Steel Diam 100X4.5 Mm Seamless 90G. Cutted For Welding Gost 17375-2001 Material: Steel. Engineering System: Heating., Division Of Steel Seamless 90G. Diam. 159X4.5 Mm Gost 17375-01 St 20 09G2s Thick-Walled P90 90 Degrees For A Pipe For Welding
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.