Bids Are Invited For The Object Of This Bid Is The Acquisition And Installation Of Outdoor Gym Equipment, Made In Full Of Aisi 304 Stainless Steel, With Welding By The Tig Process, Passive And Polished Finish, To Be Fixed In A Previously Concreted Base By The Administration, By Anti -Theft System. The Equipment Will Be Intended For Public Use By The Population Of The Municipality, Specifically From Bairro Bracinho, With Installation To Be Carried Out At The Back Of The Esf Schroeder Iii Health Unit, Located At Ricardo Gorl Street, In The Municipality Of Schroeder/Sc. The Hiring Aims To Comply With The Guidelines Of Parliamentary Amendment No. 1744/2024, And Will Be Performed Of The Preliminary Technical Study, According To Conditions, Quantities And Requirements Established In This Notice And Its Annexes

Lot 1 - Orientative Plate: Plate With 304 Stainless Steel Tubes With 2 ”X 3, 05 Mm Circular Section, 1,000 X 2,000 X 0, 9 Mm Plate; With Polished Finish, Adhesive On Both Sides, Containing All Devices With Muscles Specifications And Stretching Instructions. Or Equivalent. The Equipment Must Have An Identification Plate With Worked Muscles, Instruction Of Use And Emergency Phone. Equipment Made Of The Crea With A Mechanical Engineer And Attested Ergonomically And Biomecanically By Physiotherapist And Ergonomist Duly Accredited To Crefito Following Nr 17. Circular 2 ”X 3, Use Instruction And Emergency Phone. Equipment Manufactured By A Company Accredited In Crea With Responsible Mechanical Engineer And Attested Ergonomically And Biomechanically By Physiotherapist And Ergonomist Duly Accredited To The Crefito Following Nbr 16.779., Lot 1 - Swim Spald In Stainless Steel: Made Of 100 X 50 X 3 Stainless Steel Tubes, Ø31 Pipes, 7 X 3, Plate Pipes Stainless Steel From 3 To 4 Mm. Spacing Between The Ground And The First 14Cm Bar And Between The 30Cm Bars. Total Height Of 2 Meters And 1, 1 Meters Of Lagura. Polished Finish. Fixing To The Ground Through Stainless Steel Bleats With Anti -Theft System, Type Parabolt With Inviolable Or Equivalent Head. Equipment Manufactured By A Company Accredited In Crea With Responsible Mechanical Engineer And Attested Ergonomically And Biomechanically By Physiotherapist And Ergonomist Duly Accredited To Crefit Following Nr 17. - Stainless Steel Swallow: Made Of 30 X 50 X 3 Columns, Type Parabolt With Inviolable Or Equivalent Head Parabolt. Equipment Made By Company Accredited In Crea With Mechanical Engineer Responsible And Attested Ergonomically And Biomechanically By Physiotherapist And Ergonomist Properly Accredited To Crefit Following Nbr 16.779. 1.1/2 X 3, 05 Mm; 3.1/2 ”X 3 Mm, 240 Mm X 240 Mm X 5, 0 Mm; 0 Mm; Stainless Steel Tube Schedulle 80. Length: 1000 Mm Wide 800 Mm Height 1300Mm. Device With Polished Finishing, Screws, Pockets, Axles And Stainless Steel Bearing. Background. Tiged Welding Process, With Polished Finishing, Axles And Stainless Steel Bearings. Duly Accredited To Crefito Following Nr 17. - Diagonal Stainless Steel Rotation: Made With 1 X 3 Diameter Steel Steel Pipes, Lot 1 - Stainless Steel Walking Simulator: Manufactured In 3. 1/2 X 3, 1.1/2 X 3, 05 Mm Stainless Steel. Non -Slip With Thickness Of 2, 0 Mm. Schedulle 80 Stainless Steel Tube Bushings.