Request For Quotation Chair

Plastic Stool For A Music Cabinet. The Light Dapper Chair Is 515X592x860mm-12Pcs Art 6802D Stull Such Of A Stroudic Metalic Farch, Seats And Bits, Made Of Polypropylene By Blowing Shape. The Stool Frame Is Made Of A 10X10x1.2Mm Pipe, And Consists Of Three Main Elements: Two Side Racks And The Base For The Seat. The Side Racks Of The Upper Frame Have A Diet In The Inner Angle, Which Is Equal To 140 +/- 5 Gradus. The Side Racks Bend Along The “Complex Path” By The Radius Along The Midline Rcr = 120Mm, The Bending Of The Pipes Occurs On The Narrow Side Of The Pipe. The Base For The Seat Is Made By A Bored Shape By Means Of Bending. The Base For The Seat Connecting The Two Side Racks Bend Along The “Easy Path” By The Radius Along The Midline Rcr = 90Mm, The Bending Of The Pipes Occurs Along The Wide Side Of The Pipe. At The Ends Of The Pipe Of The Side Supports There Are Anti -Slip Plastic Plugs Of The Support In The Amount Of 2Pcs. The Chair Is Made Of Polypropylene With An Ergonomic Form. The Thickness Of The Seat Is Not Less Than 10 Mm. The Seat Has A Deepening Deepening For Sitting And Depending On The Load Attached - The Effect Of The Air Pillow. The Effective Depth Of The Seat And Height According To Gost 11016-93. The Surface Of The Seat Has Perforation In The Form Of Holes With A Diameter Of At Least 1 Mm. The Front Corners Of The Seats Are Rounded By A Radius Of At Least 80Mm. The Color Of Chairs In Agreement With The Customer. Before Supplying Color, Design To Coordinate With The Customer, The Color Is White