Request For Quotation Acquisition Of Other Reserves

Carb Gost 20487-75 Liquid. This Is A Special Tool Designed To Clean The Carburetors And Dumping Systems Of Internal Combustion Engines From Soot, Tar, Fuel Deposits And Oil Pollution., Lubrication Litol Gost 21150-87. Litol Is A Multi -Flowered Waterproof Plastic Lubricant Based On Mineral Oil. Field Of Use Of Car Friction Nodes, Industrial Equipment, Etc., Cement Gost 31108-2020. Portland Cement Is A Hydraulic Astringent Obtained By A Thin Clinker Grinding With The Addition Of Gypsum. It Is Used For The Production Of Concrete And Construction Solutions, As Well As In Industrial And Civilian Structures. The Cement Is Characterized By The Following Parameters: The Most Common Brands In Strength: 32.5, 42.5 And 52.5. These Numbers Indicate The Minimum Compression Strength After 28 Days In Megapascals. The Beginning Of The Sequence Of Cement Should Occur No Earlier Than 45 Minutes Later, And The End Is No Later Than 10 Hours After Closing Water. This Ensures The Convenience Of Transportation And Styling. The Specific Surface Of The Cement Is At Least 2800 Cm² Per Gram, Which Indicates The Degree Of Grinding. The Smaller The Grinding, The Faster The Chemical Processes Of Hardening Go. The Bulk Density Of Dry Cement Is Usually From 1100 To 1300 Kg/M³, And The True Is About 3100 Kg/M³. The Moisture Content Should Not Exceed 1.5%. The Limited Content Of Sulfates (So₃) Is Also Important - No More Than 3.5%To Avoid The Destruction Of Cement During Operation., Maslar Brush 100 Mm Gost 10597-87. The Painting Brush Is Designed For Applying Paints And Varnishes., Black Bank Pf115 Black Bank At 2.6 Kg. Gost 6465-76. Used For Various Industrial Purposes.