Bids Are Invited For Hiring A Company Supplier Of Electric Materials And Provision Of Electrical Maintenance Services To Meet The Various Secretariats Of The Municipality Of Nova Aliança Do Ivaí - Pr.

Cocle Cocler Cn, Galvanized Weking No.1, Heavy Frame 1 Output, Heavy Frame, Heavy Frame, 28/08/2025, Heavy Frame 4 Output, Head 1, Head 1 And 1/4, Head 2, Head 3, Head 3/4, Flexible Cable, Flexible 10Mm Cable Flexible 16Mm, Medium Perforating Connector, Small Perforating Connector, Split Boat Connector 10Mm, Split 16Mm Split Connector, 25Mm Boat Connector, Din 1X50a Breakout, Din 2X25a Breaker Din 2X32a, Din 2X50a Breaker Din, 2X63a, Din 3X100a Breakdown, Breakdown Din 3X125a, Din 3X150a Circuit Breaker, Din 3X32a Breaker Din Breakdown, Din 3X63a Breakout, Din 3X80a Breaker, Cecure 1 And 1/4, Cecured 1 And 1/4, Cecure 2, Cecured 3, 3/4 Cecured, 10Mm Solid Wire, High Fusing Tape, 20M Black Insolution Tape, Colored Ido, Flange 1, 1 And 1/2, Flange 1 And 1/4, Flange 3, Flange 3/4, Covered 2, 4M 5/8 18W 1, 20M Led Lamp Lamp 20W Lamp, 30W Led Lamp Lamp, 40W Led Lamp, 250W Metal Lamp, 70W Sodium Lamp, Led Retractable Lamp Of Up To 55 Watts Retractable Led Luminaire With Power Of Up To 55 Watts: Luminaria Should Be Mandatory Aluminum. Injected Or Extruded. The Luminaire Should Have Retractable Retractable Holder With Double Axis Of Movement, Horizontal And Vertical. The Base Of The Support Shall Have A Maximum Height Of 400Mm. This Mechanism Must Perform Bilateral Horizontal Movement With At Least 70º Degrees Of Opening; And Vertically With At Least 90º Degrees Of Opening. Must Have An Angle Adjustment Of At Least 15 ° Degrees. The Mechanism Must Be Able To Automatically Return To The Standard Installation Position After Suffering Horizontal Or Vertical Movement. The Mechanism Should Be Manufactured In Aluminum, Not Accepted External Springs Or Any Type Of System Exposure, Aiming To Extend The Life And Perfect Functioning Of The Retractable System. Hermetic Sealing Of The Retractable Mechanism Against Weather Is Required, And Treatment In Polymerized Polyester Electrostatic Painting. The Luminaire Should Be Fixed To The Pole For At Least 2 (Two) Bap Belts, With Supports, Screws And Nuts, Necessarily Made Of Steel With Fire Galvanization Treatment. The Led Set Should Have Heat Dissipation System Through Fins. These Fins Should Form A Single Part With The Surface That Will Be Installed (S) Led Plate (S), Not Accepted Fins, Fitted, Screwed, Glued Or Soldiers. The Optical Assembly Shall Have Distribution Lenses Of Light-Made Luminous Beams With Anti-Amarelling Thermoresistant Polymers That Has Undergone Artificial Weathering Test According To Astm G154. This Lens (S) Should Be Fixed By Screws, Not Accepted Fitted, Quick Closure, Or Clips As They May Lose Pressure And Dod Over Time And Use. The Lamp Must Have Identification Made With Laser Recording In The Co ..., Led Hose, Led 220V Hose, Full Aereo Biphasic Energy Standard, Full Bifasic Energy Standard 50A Complete Underground Exit, Typhasic Energy Standard 100A Complete Underground Said, Standard D