Tenders Are Invited For Appointment Of A Supplier To Provide Off-Road Accessories, Spares, Support, Training And Fitments For Fleet Vehicles For A Contract Period Of Five (5) Years Within The Gqeberha Area.

Tenders are invited for Appointment of a Supplier to Provide off-Road Accessories, Spares, Support, Training and Fitments for Fleet Vehicles for a Contract Period of Five (5) Years within the Gqeberha Area. Category A: Items for initial purchase 1. Aluminium canopy + fittings for double cab vehicles (Ford Ranger (x2), Toyota Land cruiser, and Isuzu KB) Aluminium Canopy with full width rear window door, and side doors. Include fitment cost. Three door opening at full-length (side doors and rear door) Centre flex waterproof hinges UV stable and corrosion resistant Equivalent to a Alu-Cab Explorer series. 2. Aluminium bar cradle roof rack + fittings (fitted to supplied canopy for Land cruiser) Must be compatible with the Canopy Have a minimum of four (4) rope attachment points for securing goods. If sold separate, to be supplied 3. Front Bulbar and removable front tow hitch + fittings for double cab vehicles (Toyota Hilux (x3),Toyota Land Cruiser and Isuzu KB) 3.1. Bull bar: Park sensor, light and airbag integration Black powder coated to prevent rust Tow and recovery attachment points Equivalent to an ARB Summit Bar Much be compatible with front hitch. Minimum warranty period of one (1) year 3.2. Front tow hitch: Ball and pin hitch rated to 3.5 t. Removable with a locking pin Must be compatible with supplied bulbar. 4. Bin liner rubberising (Toyota Land Cruiser x1, Ford Ranger X1 and Toyota Hilux X1) Five (5) mm thick polyurethane lining Minimum of two (2) year warranty 5. Custom rubber cargo mat fitted (Toyota Hilux x 3, Land Cruiser, Ford Ranger X2, Navarra X1 and Isuzu KB) Single custom fit rubber cargo mat No removable interlocking pieces Lattice shape to allow water to drain Equivalent to a Bak-Con-Mat 6. Canvas seat covers (Toyota Hilux x 3, Land Cruiser, VW transporter ( 11 seater) and Isuzu) Made from waterproof washable material. Tailored for specific vehicle Dirt and mud resistant Removable For both front and back seats Accommodation to be made for seat belt clips and seat levers. Category B- ADHOC Basis- Provisional goods and services that may be required at an ad-hoc basis upon the instruction from SAEON (As requested). 7. Provisional downstream goods and services that may be required at the instruction from SAEON 7.1. Services: 7.1.1. Fitment of equipment 7.1.2. Installation of electrical components 7.1.3. Calibration of components 7.1.4. Customisation of gear or equipment 7.1.5. General advice related to 4x4 gear and accessories. 7.2. Goods: 7.2.1. Heavy-duty High-lift Jacks (at required tonnage) 7.2.2. Heavy-duty Air Jacks (at required tonnage) 7.2.3. Heavy-duty Hydraulic Trolley Jacks (at required tonnage) 7.2.4. Heavy-duty Hydraulic Bottle Jacks (at required tonnage) 7.2.5. Sand ladders 7.2.6. Canopies both fiberglass and aluminium 7.2.7. Vehicle Recovery Kits 7.2.8. Heavy-duty Wheel Chocks 7.2.9. Heavy-duty Car Ramps (at required tonnage) 7.2.10. Portable Air Compressor Kits 7.2.11. Safety Gear and Comprehensive First Aid Kits 7.2.12. Tools 7.2.13. Ratchet strap 7.2.14. 12v High powered lithium jump starters 7.2.15. Storage accessories such as ammo crates, boxes, jerry cans and water tanks. 7.2.16. Electronics 7.2.17. Portable Fridge/freezers 7.2.18. Navigation systems and dashboard mounting 7.2.19. Communication Equipment such as ICASA Compliant Two-way radio system (for use in remote areas) 7.2.20. Electronic Winch (Synthetic Rope or cable) 7.2.21. Steel Front Bumpers incl. integrated lights, high-lift jack points and recovery shackles (PDC Friendly and Winch Ready) 7.2.22. Steel Rear Bumpers incl. integrated lights, high-lift jack points and recovery shackles (PDC Friendly and Tow bar Ready) 7.2.23. Rock sliders, Side Bars and Steps 7.2.24. Scratch and bash plates and underbody vehicle protection covers and skids 7.2.25. Awnings 7.2.26. Heavy-duty Vehicle-mounted Air Compressor Kits 7.2.27. Roof Racks, Platform racks and Customisable Storage Solutions 7.2.28. Off-road Tyres and Wheels 7.2.29. Suspension Upgrades 7.2.30. Integrated power, electrical and electronics solutions (such as house batteries, PV cells, invertors, etc.) 7.2.31. Integrated trailer braking systems 7.2.32. Integrated custom canopy systems 7.2.33. Rear axle, snorkel and diff breathers 7.2.34. Seat covers/protectors 7.2.35. Bin liners and rubberising 7.2.36. Brake Upgrades 7.2.37. Branding and Decals 7.2.38. Fasteners 7.2.39. Lubricants 7.2.40. Cable ties 7.2.41. Wheel patch kits 7.2.42. Tyre sealant aerosols 7.2.43. Electrical contact cleaner 7.2.44. Bulbs 7.2.45. Fuses 7.2.46. Relays 7.2.47. First aid kit components (Where possible use by date must exceed one year) 7.2.48. Trailer Plugs 7.2.49. O-rings, gaskets and seals 7.2.50. Batteries 7.2.51. Tools 7.2.52. Other 4x4 related items not listed Tender Link : https://www.nrf.ac.za/procurement/procurement-invitations/

Refer document

FileName	File Description
Global Tender Document	Tender Notice