Tenders Are Invited For Industrial Inspection Services - 13/2025 Non -Destructive Material Test

Industrial Inspection Services - 13/2025 Non -Destructive Material Test. The Basic Amount Of Technical Content: The Length Of The Piping To Be Tested Is Approx. 250 Meters And 2 Drum Seams. Examination Scope For The Basic Amount: 100%Magnetizable Powder And Ultrasonic Debugs For The Raw Materials Of Pipe Arches, Straight Tube Sections And Welding Seams Connected To Them. Geometric Size Inspection Of Arcs (2-2 Diameters In 5 Cross Sections, 4-4 Wall Thickness Measurement As 90 °) And Voltage Analysis. On-Site Metallographic Examination Of Arcs And Straight Tubes Above 350 ° C (1 To 1Pcs Per Segment) And Hardness (3-3Pcs Measurement Points As An Average Of 9 Measuring Points At The Site). Straight Sections Measurement Of Wall Thickness In 1 Cross Section Per Meter (4 Points Per Cross Section). Experience Measurement And Calculation Of Expansion. Sewing Test: 100%Visual-Hem-Mt Test, Hardness Measurement In 4 Places At 90 °. Zero Status Test: The Sections To Be Replaced During The Test Must Be Tested And Should Be Tested. After The Replacement Of The Segment, The Check Of The Seams, Which Is Accounted For On The Basis Of Unit Prices. 100%Magnetizable Powder And Ultrasonic Debugs For The Raw Materials Of Straight Tubes And The Welding Seams Connected To Them. Geometric Size Inspection Of Arcs (2-2 Diameters In 5 Cross Sections, 4-4 Wall Thickness Measurement As 90 °) And Voltage Analysis. On-Site Metallographic Examination Of Arcs And Straight Tubes Above 350 ° C (1 To 1Pcs Per Segment) And Hardness (3-3Pcs Measurement Points As An Average Of 9 Measuring Points At The Site). Straight Sections Measurement Of Wall Thickness In 1 Cross Section Per Meter (4 Points Per Cross Section). Experience Measurement And Calculation Of Expansion. Sewing Test: 100%Visual-Hem-Mt Test, Hardness Measurement In 4 Places At 90 °. Arc. Block Tests Are Expected: 01.03.2026. - 2026.04.14. More Details In Public Procurement Documents.