Bids Are Invited For Supply Of Electrical And Related Materials And Installation Services Intended For The Extension Of Low Voltage Network With The Implementation Of Ornamental Posts

Concrete, 10Mm Flexible Cable, 4Mm Flexible Cable, 6Mm Flexible Cable, 3X2, 5Mm, 27/08/2025 Cable, Grounding Box, Iron Cruise, Corrugated Duct 1, Pvc Conduit 1, Fusimec Tape, Fusimec Tape, Rod Rod. W/Connector, Standard 3X50 Kit, Pole Set And Ornamental Lamp In Led Technology Smd Modular With: Sae 1010/1020 Steel Pole, Continued Circular Straight Conical With A Single Longitudinal Weld With Minimum Thickness Of 2, 25 Mm, 4, 10 M Free Ground Height, Based And 04 1/2X 400 Mm Soldiers In Shape Of Feedback With Zincaded Nuts And Washers, With Cast Aluminum Polain To Cover And Protect The Base Screws Without Inspection Window. Made From Carbon Steel Plate In A Single Piece With 1 Single Longitudinal Weld, (Not Accepted Teleconnected Posts With Transverse Welds), With A Diameter Based On 100 Mm And At The Top 60 Mm For The Installation Of The Lamp. The Pole Should Be Galvanized By Hot Immersion And Painted With Polyester Electrostatic Painting At 220ºc In The Color To Be Defined. Decorative Lighting Lamp, Conical Shape With Aluminum Body Painted With Polyester Electrostatic Painting Powder At 220ºc In Color To Be Defined; Aluminum Reflector Painted With Polyester Electrostatic Painting Powder At 220ºc Microtexturized White, Sealed And Cut To Leisure To The Exact Extent Of The Modules To Facilitate Their Exchange; Accommodation For Auxiliary Equipment At The Top Of The Luminaire; Upper Aluminum Lid Patty Painted In The Color To Define; Sealing Board In Polymethylsiloxan Silicone Tarrowing Temperature Resistant Up To 200 ° C Fixing The Power Cord By Cable Press; External Stainless Steel External Bolts, Nuts And Washers. Top Of 57Mm Mm Mm Of External Diameter, Through Allen Bolts. No Technology Luminaires Will Be Accepted. Luminaire Should Contain Led Modules To Facilitate And Minimize Future Maintenance In Case Of Exchange And Can Exchange Only One Module Thus Reducing Costs, Each Module Is Coupled With Injected Aluminum Sinker. The Modules Should Have A Total Of 64 Leds Each And A Total Of 192 Leds For The Lamp. The Modules Have Dimensions Of 300X70x40mm And Ip67 Sealing Degree. Connection Cables ..., Ornamental Pole Set And Led Lamp For Public Lighting With Power Of 200 Watts And Height Of 6,500Mm. Ornamental Conjunct Should Be Composed Of Pole And Circular Ornamental Luminaire In Led; Total Height Of The Set Should Be 6,300Mm To 6,500 Mm. It Is Required That It Has A Hollow, Concrete, Smooth -Finished Conical Cylindrical Ornamental Base, With A Wall Of At Least 30Mm Thick And Height 550Mm. The Fixing System Should Be Done By Flanging, Incorporated Through Threaded Trefilated Steel Bumps, With Bolts, Nuts And Washers Necessarily Protected Against Oxidation And Vandalism. The First Section Of The Pole (Lower Section) Should Be In Zincated Or Galvanized Steel Tube, With At Least 2 Mm Thick And Minimum Of 4 Inch In Diameter, It Should Be Length Of 2, 0 Meters. The Intermediate Section Of The Pole (Central) Shall Be Zincated Or Galvanized At Least 2 Mm Thick And 3, 5 Inches In Diameter With A Length Of 2, 0 Meters. The Final Section Of The (Upper) Pole Should Be Zincated Or Galvanized At Least 2 Mm Thick And 3 Inches In Diameter With A Length Of 1000