Bids Are Invited For Price Registration For The Acquisition Of Hospital Beds And Mattresses To Meet The Demand Of The Health Department.

Mechanical, Adult Hospital Bed, With Stainless Steel Structure And Bed, Headboard/Pesor Removable In Polypropylene, With Three Cranks, Cranks, Side Grids, Serum Support And Easy -To -Decinity -Covered Collion And Zipper Courvim Cover. Headboard, Pesor And Sides Of Stainless Steel Tube, Tube -Based, Structure Of The Road Built In U -Steel Steel Stainless Steel Tubes, Movements -Driven Through Two Stainless Steel Cranks With Bakelite Cable. Round Tube Movements Drive System. Capacity Up To 180Kg. Functions: Ringing Angle Of Backrest 0 80, 0 ~ 40 Knee Support Angle. Dimensions: 2000Mm (C) X 900Mm (L) X 600Mm (A). Accessories: Mattress And Two Drain Bag Brackets, Manual Hospital For Obese Weighing Up To 250Kg, With 04 Cranks, Bed Positions: Fowler And Semi-Fowler (Cardiac) / Knee / Vascular Flexion / Leg Rise / Total Bed / Movement To Lower The Bed / Trendlemburg And Reverse Trandleburg. Leg Support Also Allows Its Elevation For Vascular Procedures Through Rack System. Drive: Bed Movements Provided By 04 Cranks Made Of Aisi 304 Stainless Steel, Polished Finish, Which Have Gas Pistons That Provides The Operator Greater Operator In The Drive. Angles And Heights: Minimum Height: 450Mm. Maximum Height: 750Mm. Dorsal Support Angle Variation: Between 70 ° To 90 °. Trendelenburg Position Angle Variation: Between 12 ° To 20 °. Variation Of The Reverse Position Angle Of Trendelenburg: Between 12 ° To 20 °. Safety Loads: Maximum Patient Weight: 250Kg. Safety Workload: 260Kg. Structure Made Of Rectangular Steel 1020 50 X 30 X 1, 5 Mm Of Wall Thickness With Finishing With Peeing, Blasting And Electrostatic Painting With 180 ° Greenhouse Drying Powder; Bed: Structured In All Its Length With Square Tubular Structure In 20X20mm Tubes, Superimposed By Four 1020 Steel Plate Segments, 1, 2Mm Thickness With Crop Finishing, Blasting And Electrostatic Painting With 180 ° Greenhouse Drying Powder); Points On The Four External Ends For Bed Rod: Has 04 Points Located At The Ends Of The Bed (Outside) For Serum Support. Side Grids: Made Of High Density Polyethylene, High Durability And Resistance And Providing Lightness And Practicality In The Activation System; Cabece And Pesteira: Made Of High Density Polyethylene, With Aisi 304 Stainless Steel Fittings, Are Easily Removable For Patient Access; Casters: Swivel, With A Diameter Of 5 ”Thermoplastics Of Al ..., 33Kg/M³ Density Hospital Bed Mattress Coated In Flexible Blue Napa, Offering Durability And Ease Of Cleaning. Free Airtight -Free Hermetic Sealing, While The Breathing System Ensures Adequate Ventilation. With Zipper. Dimensions: 1.88 Cm Long X 88 Cm Wide X 12 Cm High.