Tenders Are Invited For Renovation Of The Roof And Stairs With A Driveway For Disabled People In The Building Of The Poviat Eldership In Giżycko At Heroów Westerplatte 4Th Street 4.

1. The Subject Of The Contract Is The Task: Execution Of Construction Works Involving The Renovation Of The Roof And External Stairs With A Driveway For The Disabled In The Building Of The Poviat Eldership In Giżycko At Bohaterów Westerplatte 4. 2. The Scope Of Work Includes: 1. Roof Renovation: 1) Dismantling Flashings Of Attic, Hoods, Cornices Of Sheet Metal2) Dismantling Of Gutters And Downpipes: A). Replacement Of Gutters And Rhinhaków). Installation Of New Triggers). Re -Assembly Of Trigger Pipes3) Roof Covering With Thermosal Roofing Felt. 5.6 Mm (Cleansing, Wedges, Papa Stuck To The Walls And The Top Of The Attic) 4) Covering Chimneys With Thermosal Felt. 5.6 Mm (Breaking Old Felt, Replenishing Plasters, Priming, Sealing) 5) Execution And Assembly Of Chimney Flue Protection Against Birds From The Galvanized Mesh. Installation Method Enabling Access To The Chimney Flue And Its Cleaning- All Chimney Flues 6) Installation Of Flashings Of Attic, Hoods, Galvanized Sheet Metal, Replacement Of The Exhaust Pipe Made Of Pvc Ø110 Mm (Glued Connection) To The Existing Steel Fireplace Base. The Old Base Has Been Cleaned And Painted With Oil Paint Twice). Replacement Of The Transmission To The Systemic Along With The Processing (2 Pcs) 9) Replacement Of The Attic Stairs With A Mechanism Supporting The Folding And Unfolding Of The Ladder 10) Mounting The Scaffolding11) Installation Of The Scaffolding11) Repair Of The Lightning System On The Roof 12) Cleaning The Area After Work And Utilization Of Waste2. Renovation Of External Stairs And Ramps For Disabled People1. Replacement Of The Surface Of The Stairs And Ramps For The Disabled: 1) Liquidation Of The First Degree Of Stairs At The Ground Level And To Make Hardening From The Bet Cube In Its Place. 6Cm On A Cement Stabilized Foundation, 2) Replacement Of The Surface Of The Stairs And Ramps For The Disabled: 3) Dismantling Of Existing Cladding And Pedestal, 4) Supplementing And Profiling The Concrete Plate Of The Stairs And Ramps To Ensure The Correct Decline And A Free Transition, 5) Correction Of Stairs Geometry - Designing Steps With A Height Of 14Cm And Width 35Cm, 6) Cladder Of Gray Gray Plates, Flames (40 × 60 × 2Cm) On All Utility Surfaces: Degrees, Risers, Mocking, Pedestal And Sides Of The Ramp, 7) Dismantling Of Existing Balustrades, 3. Performing New Balustrades And Handrails- In One Of The Two Variants:- Variant 2: Stainless Steel Balustrades, 1) With Balustrades Or Walls Adjacent To The Ramps, Intended For The Movement Of Disabled People, Use Bilateral Handrails, Placed At An Altitude Of 0.75 And 0.9 M From The Movement Of Movement 2) Handrails At Their Beginning, Before The End And At The End By 0.3 M And Finish In A Way That Ensures Safe Use 3) Handrails At The Ramps Should Be Distant From The Walls To Which They Are Attached, At Least 0.05 M 4) The Balustrades At The Ramps Should Not Have Pointed Elements, And Their Design Should Ensure The Transfer Of Horizontal Forces Specified In The