Tenders Are Invited For Refuse Recycling Services - Collection And Further Waste Management, Semi -Finished Production For The Production Of Alternative Fuel (Waste Code 19 12 12) From A Municipal Installation In Wola Pawłowska

Refuse Recycling Services - Collection And Further Waste Management, Semi -Finished Production For The Production Of Alternative Fuel (Waste Code 19 12 12) From A Municipal Installation In Wola Pawłowska. 1. The Subject Of The Contract Is Successive Collection And Further Waste Management, Semi -Finished Production For The Production Of Alternative Fuel (Waste Code 19 12 12) From A Municipal Installation In Wola Pawłowska. 1.1. The Offered Method Of Developing Components For The Production Of Rdf Must Comply With The Legal Provisions In Force In This Respect And Recovery Processes Specified In Annex 1 To The Act Of 14 December 2012 On Waste (Journal Of Laws Of 2023, Item 1587, As Amended) 1.2. The Estimated Amount Of Waste That Will Be Transferred To The Contractor During The Period Of The Contract Will Be No More Than 6,000 Mg (Subject To The Possibility Of Transferring Less Amount During The Contract, But Not Less Than 4,000 Mg). The Expected Monthly Amount Of Waste Is Estimated At About 1000 Mg. 1.3. Waste Intended For Further Development Is Created On The Sorting Line, On Which Unsorted Municipal Waste (Code 20 03 01) And Raw Material (From Groups 15 And 20) Are Sorted. Waste Is Burned On The Press In The Form Of Cubes With Dimensions Of 80X100x150 Cm Tied Steels With A 3.2 Mm Thick Wire. The Average Volumetric Density Of The Waste Is 480 Kg/M3. 1.4. Reception Of Components For The Production Of Alternative Fuel (Rdf) Will Take Place Successively From Monday To Friday, 2 Transports Per Day (Approx. 44 Mg) Or In The Quantity Specified In The Unit Order Sent By E -Mail To The Representative Of The Contractor 1.5. The Collection Of Components For The Production Of Alternative Fuel (Rdf) Will Take Place From The Rzgok Area In Wola Pawłowska, Commune Ciechanów. The Loading Of The Component Is On The Side Of The Ordering Party. Weighing The Waste Collected By The Contractor Will Take Place On The Legalized Weight Of The Employer. 1.6. The Contractor At The Latest On The Eve Of Waste Collection, Electronically To The E-Mail Address [email protected] Will Send The Notation: The Time Of Arrival Of The Vehicle, Tractor And Semi-Trailer Registration Numbers, The Drivers Name And Surname With The Number Bdo Transporting Number. In The Absence Of Notification Within The Indicated Period, The Waste Issue Will Not Be Implemented, And The Contracting Authority Will Be Entitled To Calculate Contractual Penalties In Accordance With The Provisions Of The Contract 1.7. Any Weighing Of The Collected Waste Taking Place On The Balance Of The Ordering Party Will Be Confirmed By Weight Receipt And Waste Transfer Card. The Document In The Form Of Weighing Proof At The Employer Will Be The Sole Basis For Determining The Mass Of The Collected Waste Between The Contracting Authority And The Contractor. Based On The Weighing Evidence Generated At The Employer, There Will Be A Settlement With The Contractor. Each Transport Of Waste Collected By The Contractor Will Be Recorded In The Weight System And The Bdo Register. The Employer Will Each Time Draw Up A Waste Transfer Card Via An Individual Account In A Product And Packaging Database (Bdo) And Waste Management In Accordance With Art. 67 Paragraph 5 Of The Act Of 14 December 2012 On Waste (Vol. Journal Of Laws Of 2023, Item 1587 Of