Bids Are Invited For Acquisition Of Two Industrial Stores For The Municipal Secretariat Of Education, According To The Term Of Reference

4 -Burner Industrial Stove For Lpg (Liquefied Petroleum Gas) With Independent Taps For Burners Fixed On The Front And Oven Burner Handle Located In A Command Panel At The Bottom. Removable Cast Iron Grills. The Burner Oven With Flame Supervisor Device, According To Abnt Nbr 15076. Usage Pressure: 2, 8Kpa = 280Mmca. Top Dimensions: 1030Mm +/- 30 Mm (Width) X 1030Mm +/- 30 Mm (Depth) X 865Mm +/- 35Mm (Height). Stainless Steel Structure. 4 (Four) Foot In Profile L Of Equal Tabs And 1/16 Minimum Thickness. They Should Be Welded At The Bottom And Inside Of The Profile, Perforated Bar Segments With 7/8 Internal Thread With 50Mm High To Receive Adjustable Shoes. Adjustable Shoes Consisting Of Metal Base And Massive Polyamide 6.0 Tip (See Design), Fixed So That The Equipment Is Approximately 50 Mm From The Floor. The Lower 60Mm -High U -Profile Disorders And 15Mm Horizontal Tabs, 1/16 Minimum Thickness, Welded With Each Other, Forming A Rigid Frame Fixed To The Feet Through A Set Of 8 1/4 X 1/2 Sexishes Stainless Steel Screws And Stainless Steel Pigs. The Upper Frame Composed Of 60Mm -High Uf -Profile Cross -Halve And 15Mm Of Horizontal Flap In 1/16 Minimum Thickness. 180Mm High And Posterior Side Platters With 15Mm Tab And Lower 10Mm, Fixed To The Feet Through A Set Of 8 ¼ X ½ Nursed Stainless Steel Screws And Stainless Steel Nuts. The Lateral And Posterior Platters Are The Lateral And Posterior Closure Of The Stove. The Upper Stainless Steel Plate Obtained By Perfectly Level Laser Cutting. Fixing The Top To The Feet Through 4 Stainless Steel Singers Welded On The Bottom Face Of The Top And Fixed To The Foot Singers Through Screw. Detailed Specifications: