The Solution Masonry Cement Gost 28013-98 M150 Brand. A Cement Is Called Powdered Astringent, Which Has Hydraulic Properties. It Is Made On The Basis Of A Clinker, In Which Mineral Additives Containing Calcium Sulfate Are Added As Additives. It Is Mainly Used For The Preparation Of Construction Solutions And Various Concrete, Which Have A Wide Sphere Of Use. The Fundamental Difference Between The Cement Mortar And Other Mineral Binders Is The Ability To Gain Strength Even In A Humid Environment, While Other Solutions (For Example, Gypsum) Are Needed, Dry Air Is Needed. 60 Bag, Each Bag Should Be 50 Kg., Dry Putty Mixture On A Gypsum Basis In 2/1 - M25, Corresponding To The Article Rk 1168-2006, Designed For The Finish Layer, Is A Powdered Material That, After Mixing With Water, Forms A Pasty Mass Used To Align The Walls And Ceilings Before Painting Or Okling With Wallpaper. Basic: Gypsum, (Means Compression Strength Of At Least 2.5 Mpa). Purpose: The Finish Layer, That Is, For Thin -Layer Leveling Of The Surface After Preliminary Leveling With Plaster. The Surface Should Be Dry, Cleaned Of Dust, Dirt, Fat Spots And Peeling Particles. Storage: In A Dry Place, In A Closed Package, At A Temperature Of At Least +5 ° C And Not Higher Than +30 ° C, The Shelf Life, Usually 6 Months. 70 Bag, Each Bag Should Be 30 Kg.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.