Tenders Are Invited For Renovation Of The Guardians Of The Rescue And Firefighting Unit. Delivery And Assembly Of Segment Gates At Jrg Psp No. 2 In Piła.

The Task Includes Performing The Following Works: Delivery And Assembly Of 7 Segment Gates Dimensions (Sxw) 3500 X 3750 Mm Hörmann Or Equivalent. Dimensions And Assembly Of 1 Segment Gate With Transition Doors Dimensions (Sxw) 3500 X 3750 Mm Hörmann Or Equivalent. Black Gates: Insulated Steel Segments, Made Of Steel Galvanized Stalowa, Insulated With Pu Foam, From The Outside And Inside Protected Against Fingertips, Marginal Steel Angles And Threshold Seal With Epdm With Seals Between Segmental Seals And The Epdm Lintel Seal. The Height Of The Segments Of The 625/750 Mm. Mm. Duratec Highly Resistant To Scratches. The Glass Frame From The Outside And Inside Primed With Polyester Paint With A Wet 3000 Red Wet Method. Top: From The Outside And Inside Primed With Paint Based On Polyester Wet Method In Ral 3000 Red From The Outside Of The Embossing L Micrograin, From The Inside In The Stucco Structure. With Shaft Glass In The Color Of The Glazing Frame Drive And Gate Equipment: Wa 500 400V Drive, 50 H Opening - Stop Closing, Locking 7 Segmented Display Adjustable Power Limiter. Ip 65 Protection Degree Automatically Closing. Transitional Door; Made Of Stainless Steel Without A Protruding Threshold, With A Self -Loader, Handle, Lock, Width 940 Mm, 2205 Mm Passage Height. Stainless Steel Threshold. Additional Equipment: Two Remote Controls, A Manual Emergency Opening Chain, Receiver, Transmitter, Photocell, Program For Programming, Rwa System, Quick Rwa System, Fast Gate Extending System For The Fire Brigade, Led 230 V Ac Red-Green Chain Should Be Delivered And Programmed For Each Gate. In The Garage. The Cables Should Be Laid In A Perforated Cable Tray After Installation, Necessary Electrical Tests Should Be Carried Out. Until Four Gates Should Be Used A Controller Enabling The Opening Of The Gates From The Level Of The Alarm Point. The Contractor Must Cover Each Gate With Service Inspections In Accordance With The Manufacturers Recommendations For A Period Of Min. Painting Within The Gates After Their Replacement. - The Contractor, In Order To Submit An Offer, Should Take A Local Vision And Personally Perform The Devices Necessary For The Correct Completion Of The Order,