Request For Quotation Purchase Of Goods For The Repair Of The Boiler Room

Adapter With External. Thread 20 * ½ * Plastic, Polypropylene Pipes, Division Of Sewer Straight 100X90, Paul Discharger Sewer 50*45, Districation Spection 50*90 Degrees, Ball The Bray Brass 47.25. In-N.R. Du 25 Py 40 Lever. External, Internal Thread, Laying Pon Under The Flange Du 40. Sealing (Sealing) Flange Compounds Diameter-Per 40 Pressure-10 Kgfs/Cm2 (Bar) External Diameter Of The Gasket-91 Mm Internal Diameter Of The Gasket-45 Mm Mm Mim Thick, Permanent 20 (White), Direct Tees For Pvc Pipes. Size - 50*50, The Plug D.25 Is Plastic, Electrodes Lb-52U (Lb-52U) 2.6 M. • Low-Water Welding Electrode Lb-52U (Lb-52U) Is Designed To Enhance The Back Of The Weld. The Use Of This Electrode Allows You To Get An Excellent Swimmed Suture Metal And A Neat Root Scales Without Defects When Welding On One Side Of The Connection. Lb-52U Provides Much Better Arc Stabilization And Melting Than Other Low-Breeding Electrodes. The Weight Of The Packaging. 5 Kg, Pon Gas Laying Under The Flain Fit 200. The Scope Is An Seal (Sealing) Of Flange Joints Diameter-Per. 200 Pressure-10-16 Kgs/Cm2 (Bar) External Diameter Of The Gasket-271 Mm Internal Diameter Of The Gasket-216 Mm Laying-2 Mm., Plastic Multi-Purpose Lubricant (Gost 21150-87) Is Suitable For Both Lubrication Of Bearings And For Friction, Torsion, Rolling, Rolling, Sliding Of Industrial Equipment, Vehicles, Electric Machines And Other Mechanisms Operating At High Loads And A Wide Temperature Range. The Temperature Range Of The Use Of Lubrication Is From -30 To +120 ° C., Pon-Laying Under The Flanel Du 150. The Scope Is Sealing (Sealing) Of Flange Compounds Diameter-Da 150 Pressure-10-16 Kgs/Cm2 (Bar) External Diameter Of The Gasket-216 Mm Internal Diameter Of The Gasket-161 Mm Laying-2 Mm Mm., Pipe Metal Diameter 150 Mm, Ball Polypropylene Tap 20, Clutch 20 X 3/4 External Thread Plastic, Fluttered Polypropylene Tap 25, Sewer Clutch 100*100, Polypropylene Pipes Of 20, Bolts M-20, Electrodes Mr 3 (E 46), 3Mm. The Electrodes Are Designed For Welding Of Angular, Butt, Metal Joints Of Metal With A Thickness Of 3 To 20 Mm. Welding Electrodes With A Diameter Of 2.5 To 4.0 Mm Are Suitable For Welding In All Spatial Positions; With A Diameter Of 5.0 Mm - For Welding In The Lower, Horizontal On The Vertical Plane And Vertical From The Bottom -Up Positions. The Weight Of The Packaging. 1 Kg, Pipe Metal Diameter 200 Mm, Ball Valve 47. M/M Du 20 Lever. External, Internal Thread, Steel Allocation, Dn Diameter - 50 Mm Fitting Type, Permanent 25 (White), Plumbing Len Is A Pure Natural Product Made Of Thin, Homogeneous, Long -Fiber, Garbage Flax, Obtained From Flax Stem., Sewage Pipe 50* 1.8* 2000 Mm, Club 25 *3/4 Connective (American), External Thread Plastic, Steel Flanges (Dn 40), Paronite Gasket 300 Mm. Scope Of Application-Seal (Sealing) Of Flange Compounds Diameter-Da 300 Pressure-10-16 Kgs/Cm2 (Bar) Internal Diameter Of The Gasket-264 Mm Laying Thickness-2Mmm, Steel Welded Flange Flat Du 20 Ru 16, Division Of Ppr 25 Plastic, Haye M-20, Removing Ppr 20 Plastic, Club Sewer Pvc 50 Mm, Divid Material Steel. The Outer Diameter Is 80 Mm., Rubber Laying Under The Flain Du 250. The Scope Is Sealing (Sealing) Of Flange Compounds Diameter-Da 250 Pressure-10-16 Kgf/Cm2 (Bar) Internal Diameter Of The Gasket-264 Mm Gasket Thickness-2Mm., Transition Steel Of Dn 89*57-3.5*3 (Du80*50) B/Seam P/Hawk., Ball The Brand Brass 47.32. In-N.R. Du 32 Py 25 Lever. External, Internal Thread, Disk Circle Of Cutting Meadows Of An Abrasive 180 X1.6 Meadow, Division Of Steel Du 15*3. • The Maximum Temperature Of The Working Environment Is 425 Degrees. • Divid Material Steel • The Working Environment Is Non -Aggressive Environment, Steam, Water, Liquid Medium, Gas, Oil • Working Pressure 16 Bar • Method Of Manufacturing A Whole • Type Of Attachment For Welding • Bending Angle 90 Degrees. • Conditional Diameter (Du) 15 Mm, Adapter With External. Thread 25 * 1/2 ″ Plastic, The Plug Is 89X3.5. Details Of Pipelines Designed For Constant Or Temporary Sealing Of The End Holes Of The Main And Commercial Pipeline Structures., The Sewer Sewer 100*45, Steel Transition 100X50 Mm, Type: Concentric; Seamless, The Plug D.20 Is Plastic, Sewer Tee 100X100 Mm