The Subject Of The Contract Is The Successive Delivery Of Metallurgical Products From Colored Metals And A Service Of Cutting Metallurgical Products To Size According To The Contracting Authority. The Order Consists Of Three Assortments Of Metallurgical Products And Cutting Services. Assortment 1: Copper Rods According To En 13601 And Copper Sheets According To En 13599. Round Bars (Dimension: 5 To 50Mm) In An Estimated Amount Of 100 Kg. Flat Dimensions (Dimension: Thickness X Width, 5X75mm To 40X250mm) In An Estimated Amount Of 100 Kg. Sheets With A Thickness Of 1 To 10Mm In An Estimated Amount Of 3000 Kg. Assortment 2: Brass Bars In The Mo58a Species According To En 12164. Round Rods (Dimension: 4-50Mm) In An Estimated Amount Of 2,500 Kg. 6-Stamp Bars (Dimension: 5-50Mm) In An Estimated Amount Of 500 Kg. Assortment 3: Aluminum Rods, Pa6 Species, According To En Aw-2017A. Round Bars (Dimension: 5-400 Mm) In An Estimated Amount Of 10,000 Kg. Flat Bars (Dimension: Thickness X Width, 0.5-150Mm) In An Estimated Amount Of 100 Kg. 4. Cutting Service. The Cutting Method Always Requires Agreement With The Employer. Cutting Is Required: For A Specific Dimension With A Saw; For Compliance With The Drawing With A Laser Or Water. A Detailed Description Of The Order, Including The Required Parameters Of Metallurgical Products, Specifies The Description Of The Subject Of The Contract, Which Is Annex 1 To Swz.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.