Request For Quotation Goods For Household Needs

Club Compression With External Thread 75*2 1/2 Poelsan. It Is Used For A Quick Connection Of The Pnd Pipes In Drinking And Technical Water Supply Systems, Irrigation Systems, In Sewer Systems, For Pumping Chemical Solutions. This Fitting Of Environmentally Friendly Material, Polypropylene. Diameter 75*2 1/2 (Pn6), Diameter Du75, The Composition Of The Case -Polypropylene, Nut -Polypropylene, Tsang White Acetyl Resin, Thoroidal Seal -Nbr (Nitril -Butyl -Razin), Parameters -The Rate Of Operation Is From 0 To 40 And Can Withstand Pressure Up To 10 Bar., The Pe Cornage Pe Compression 75/50/75 Is Used To Quickly Connect The Pnd Pipes In Drinking And Technical Water Supply Systems, Irrigation Systems, In Sewer Systems, For Pumping Chemical Solutions. This Fitting Is Made Of Environmentally Friendly Material, Polypropylene. Diameter 75/50/75, Diameter Du75, Composition Of The Case -Polypropylene, Nut -Polypropylene, Tsang White Acetyl Resin, Toroidal Seal -Nbr (Nitril -Butyl -Razin), Parameters -The Rate Of Operation From 0 To 40 And Can Withstand Pressure Up To 10 Bar., Division Of Pe Compression 75 Is Used For A Quick Connection Of Pnd Pipes In Drinking And Technical Water Supply Systems, Irrigation Systems, In Sewer Systems, For Pumping Chemical Solutions. This Fitting Is Made Of Environmentally Friendly Material, Polypropylene. Material Pe 100, Diameter 75 (Pn6), Diameter Du75, Composition Of The Case -Polypropylene, Nut -Polypropylene, Tsang White Acetyl Resin, Toroidal Seal -Nbr (Nitril -Butyl -Razin), Parameters -The Rate Of Operation From 0 To 40 And Can Withstand Pressure Up To 10 Bar., Transition Pe Compress.D-75/63. The Cloth Of The Squeezing Transitional Is Used For The Rapid Connection Of Polyethylene Pipes Pe Of Different Diameters, For The Transition Of Pipes Of Larger Diameter To The Pipes Smaller. It Is Used In Drinking And Technical Water Supply Systems, Irrigation Systems, In Sewer Systems. Nominal Pn Pressure - 16 Bar, Pipe Diameter 75, Pnd Material, Clamping Ring White Polyacil, Material Of The Sealing Ring Nitrille Rubber Nbr, Transition To Diameter 63, Connection Of Compression/External Threads, Pace Of The Working Medium Up To +40 C, Type Of Coupling, Pipe -Pipe, Nbr Seal, Sealing Nbr, The Key For Pe Fittings Is 32-63 Mm White, Designed For A Sealed Connection Or Dismantling Of Pipe Segments. A Special Tool Simplifies The Installation Process Due To The Dense Girth Of The Nut - There Is Enough Little Effort To Tighten Or Loosen The Fasteners. The Design Of The Key Is Represented By Protrusions Of 2 Diameters And An Ergonomic Handle. The Recess Does Not Slip Along The Surface Of The Connecting Element, Guarantees The Reliability Of The Water Supply System. Nominal Pressure Pn - 16Bar, Pipe Diameter 32-63Mm, Pnd Material, Clamping Ring White Polyacil, Material Of The Sealing Ring Nitril Rubber Nbr, Connection, D-65 Vu/Vl Balet. Caps Full -Time Mv1 Bv.51 Series Belong To Shut -Off Valves And Are Not Designed To Regulate The Flow. They Perform The Function Of Quick Overlap Of The Flow On The Domestic Use Of Hot And Cold Water Supply Systems, Heating. Do Not Create Resistance To The Flow. Using Ball Valves As A Regulatory Reinforcement Is Prohibited. Nominal Diameter Dn - 65Mm, Nominal Pressure Pn - 25Bar, Connection Of Internal Thread, Type Of Accession - Coupling (Threaded), The Pace Of The Working Medium Max - Up To +150So, Max Temperature - 25000 Cycles, Brass Material, Locking Organ - Brass, Type Of Seal / Fluoroplast / Water - A, The Passage Of The Ball Is Full -Pass, The Control Type - Manual, Control - Handle, Water Tap - No, Weight - 2.965 Kg. Parameters Of The Crane Of The Ball -Shaped Du65 Ru 25, D-75 Thread Steel. Steel Threads Are Designed For Installation On The Pipeline Of Various Equipment And Reinforcement That Has A Coupling Type Of Connection (Pressure Gauges, Counters, Testing Cranes, Airborne Valves, Etc.), As Well As For The Branch Of The Additional Line Of The Pipeline. Steel Carving Is A Piece Of Pipe, On One End Of Which The Outer Pipe Cylindrical Thread According To Gost 6357-81 Is Cut, And The Other End Is Designed For Welding To The Pipeline. Steel Threads From Water And Gas Pipes Gost 3262-75 Are Made. A 75 Mm Steel Welding Carvings Is Used As A Connection Of A Metal Pipeline With A Diameter Of 75Mm In Heating Systems, Cold And Hot Water Supply And Hot Water Supply. Diameter 75Mm, Pressure Ru <= 1.6 Mp Length 15Cm, The Pnd Koln D-60, Compression Fittings (Kf) Are Designed To Connect And Install The Pnp Polyethylene Pipeline. The Kf, Unlike Their Analogue Of Polyethylene Fittings (Adhesions), Are Very Easy To Operate And Do Not Require Additional Equipment For Their Installation. Kf, Unlike Polyethylene, Can Be Used Several Times. Installation And Dismantling Is Carried Out Manually Or Using A Special Key. Material Is Polyethylene. Diameter 60-60 (Pn10), Diameter 60-60, Pressure 10 Bar, Weight 805G, Composition-Polypropylene, The Connecting Compression Coupling Is Used To Quickly Connect The Pnd Of Equal Diameter Pipes In Drinking And Technical Water Supply Systems, Irrigation Systems, In Sewer Systems, For Pumping Chemical Solutions. Diameter 75 (Pn6), Diameter Du75, Composition Of The Case -Polypropylene, Nut -Polypropylene, Zang White Acetyl Resin, Toroidal Seal -Nbr (Nitril -Butyl -Razin), Parameters -The Pace Of Operation From 0 To 40 And Can Withstand Pressure Up To 10 Bar., Pnd Koln D-50. Compression Fittings (Kf) Are Designed For Connecting And Installing The Pnp Polyethylene Pipeline. The Kf, Unlike Their Analogue Of Polyethylene Fittings (Adhesions), Are Very Easy To Operate And Do Not Require Additional Equipment For Their Installation. Kf, Unlike Polyethylene, Can Be Used Several Times. Installation And Dismantling Is Carried Out Manually Or Using A Special Key. Material Is Polyethylene. Diameter 50-50 (Pn10), Diameter 50-50, Pressure 10 Bar, Weight 767G, Composition-Polypropylene