Technical Specification For Pipes Steel, Electric Welding, Straight -Line. Pipe Steel Electric Welding Outer External Diameter Ø57x3. Technical Characteristics: Gost 10704-91. The Internal Diameter Of The Pipe (Conditional Passage) Is 50 Mm. The Wall Thickness Is 3 Mm. Material -St. 3. Pipes Should Withstand Tests With Hydraulic Pressure Over 16 Mpa, Technical Specification For Pipeline, Electric Welding, Straight -Line. The Pipe Is Steel Electric Welding. The Outer Diameter Is 76X3.5. Technical Characteristics: Gost 10704-91. The Inner Diameter Of The Pipe (Conditional Passage) Of Du-70 Mm. The Wall Thickness Is 3.5 Mm. Material -St. 3. Pipes Should Withstand Tests With Hydraulic Pressure Over 16 Mpa., Pipe Steel Electric Welding External Diameter Ø133x4.0 Technical Characteristics: Gost 10704-91. The Inner Diameter Of The Pipe (Conditional Passage) Is 125 Mm. The Wall Thickness Is 4.0 Mm. Material -St. 3. Pipes Should Withstand Tests With Hydraulic Pressure Over 16 Mpa.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.