1. The Subject Of The Contract Is The Purchase And Delivery Of A Used Tool Vehicle Not Older Than 2010 With A Chassis To 550 Thousand. Km With Sinization Buildings With The Following Technical Parameters: Chassis: 1) Year Of Production Not Older Than 2010, Mileage Up To 550 Thousand. Km2) Engine Power Min. 220 Hp3) Wheels - R19.5 4) Dmc Of The Vehicle Up To 12,500 Kg5) Load Capacity Min. 5,000 Kg 6) Rear Bridge Lock7) Wheelbase Matched To The Building Capacity, As Low As Possible8) Pneumatic Driver Armchair9) Abs11) Radio11) Manual Transmission 12) Cabin Without Visible Signs Of Corrosion, Seats Without Chafing 13) Non -Accidents14) Start -Up Warranty 3 Months From The Date Of Delivery Of The Vehicle, A Factory Tanker With A Capacity Of 5000 To Max 6000 L2) Tank With A Minimum Thickness Of 5 Mm 3) A Tank Protected Against The Harmful Effects Of Impurities Both Inside And Outside4) Double Protection Of The Compressor Against Flooding 5) Rear Dennica Opening 6) Hypertension And Vacuum Safety Valve 7) Fluid Suitable For The Construction Of The Tank - Not Used10) Building Warranty Minimum 1 Year 11) Hose Dn 110 8 Mb 12) Fast Switching On The Lever Hose2. The Subject Of The Contract Must Be Complete, Free From Structural, Executive And Legal Material Defects, Ready For Use And Must Meet The Requirements Of Polish Traffic Rules In Accordance With The Act Of 20 June 1997 Road Traffic Law (I.E., Journal Of Laws Of 2024, Item 1251, As Amended). 3 He Must Meet The Requirements Of A Vehicle Allowed To Travel On Public Roads In Accordance With Applicable Traffic Law, Have The Necessary Approval And Certificate Of Compliance With Ce Standards And Must Have Documents Necessary For Its Registration. 4. The Contractor Guarantees The Implementation Of The Subject Of The Contract In Accordance With The Conditions Set Out In This Swz. The Contractor Bears All Costs Related To The Preparation And Submission Of Its Offer And All Related Documents. 5. The Terms Of Receipt By The Contracting Authority Of The Subject Of The Contract: 1) The Supplier Will Provide The Subject Of The Contract To The Seat Of The Ordering Party At His Own Expense. 4) When Receiving The Subject Of The Contract, Documents Required By Law Should Be Provided, And In Particular: Approval Certificate, User Manual, Warranty Book. 5) The Final Pickup Is Considered To Be Perception Without Reservations. 6) The Date Of Signing The Non -Abusing Final Acceptance Protocol Is The Date Of Receipt. 6. The Minimum Warranty Period Required By The Ordering Party Is: 6 Months For Buildings And On The Chassis From The Date Of Delivery Of The Subject Of The Contract.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
