Bids Are Invited For Preaching For The Acquisition Of 30 Kg Industrial Dryer.

Industrial Clothing Dryer Electric Office, With A Minimum Capacity Of 30 Kg Of Dried Load Per Operation, Intended For Use In The Laundry Sector Of The Santo Antônio Municipal Hospital, In The Municipality Of Nazareno/Mg. The Equipment Should Be New, First -Use, Made With Sae 1020 Carbon Steel Monobloc Structure And Profiles, With Anti -Ruginous Treatment And Epoxy Ink Background Painting, As Well As External Finish With Heat And Moisture Resistant Synthetic Ink. The Structure Should Have Efficient Thermal Insulation, Which Avoids Heat Losses And Ensures Higher Energy Performance During Continuous Functioning. The Dryers Internal Basket Should Be Made Of Sae 1020 Galvanized Steel Or Aisi 304 Stainless Steel, Properly Perforated With Shaped Mixers And Robust Support Bottom, With Internal And External Finish According To Technical And Sanitary Standards. The Drum Shaft Should Be In Machined And Rectified Carbon Steel Mounted On Spheres Bearings With Accessible Fatty Lubrication. The Equipment Was Activated By Means Of A Three -Phase Induction Electric Motor, Cage Rotor, With Minimum Ip 54 Protection, Operating At 60 Hz And Compatible With Local Electrical Voltage (220/380V). The Transmission Will Be Made By V-V-Protective Polishing And Industrial Straps System, Fully Attending To Nr-12. The Heating System Should Be Composed Of Stainless Steel Tubed Resistance With Aluminum Fins, With High Efficiency Electric Exhaust, Ensuring The Forced Air Circulation Of Heated Air. The Front Door Of The Equipment Should Have A Wide -Opened Tempered Glass Display With Wide Opening And Locking System That Prevents Operation While Open. The Control Panel Should Be Frontal, With Electronic Or Digital Commands, Containing Thermostat, Timer (Timer), Thermometer, Armored General Key And Light Operating Flags.O Equ, 08/08/2025