Bids Are Invited For Hiring A Specialized Company To Supply Furniture, With The Objective Of Meeting The Needs Of The Municipal Education Secretariat Of Jussara/Ba, As Well As Their Respective School Units And Day Care Centers, Aiming At Improving Physical Infrastructure And Adequate Care Of Students, Teachers And Other Education Professionals.

Cabinet Made Of Sae-1008 Steel Plate To Sae-1012 With Dimensions From 1980 To 2000 Height X800 To 900 Width From 400 To 450Mm Depth, Crystal Gray And Textured Finish, Consisting Of 02 Doors With Side Pivoting. The Right Door Has 5 Folds On The Left Side, Forming The Built -In Handle On The Door, The First With 8Mm Towards The Door In 180º, The Second With 14, 5Mm Towards The Door At 90º, The Third With 51, 5Mm Towards The Door At 90 ° And The Fifth With 17, 5M With Direction Into The Door At 90 °. In The Right Side Part Should Have 2 Folds, Upper And Bottom Of The Door, The First With 13Mm And The Second With 18Mm, Both Towards The Door At 90º. The Left Door Has 3 Folds On The Right Side, Forming The Right Door Stop, The First With 8Mm Towards The Door In 180º, The Second With 13, 5Mm Towards The Door At 90º And The Third With 18, 5Mm Towards The Door At 90º, In The Left Side Has 2 Folds, Both Towards The Door In 90º. Each Port Should Contain 2 Horizontal Omega Reinforcements In “C” By Means Of Point And Bottom Welding To The Bottom Of The Doors, And A Vertical Omega Reinforcement On Each Door In The Central Part Throughout Its Length, As Well As 3 Hinges In Appropriate Places, And Each Receives 3 Point Welding Points, Also Soldered In The Lock Area To Assist In The Locking System. For Greater Safety The Cabinet Is Equipped With A Locking System Through A Cremoner System That Locks The Door In The Central, Upper And Lower Region, Accompanies Two Keys. It Has 04 Shelves Reinforced With 3 Folds On The Front And Rear And Two Folds On The Sides, Are Adjustable Through Racks Fixed On The Sides, File Made Of Sae-1008 Steel Plate With Sae-1012 With Dimensions Of 1300 To 1350 Height X 450 To 470 Width X From 560 To 600M Depth, Three Internal Reinforcements, Vertical Format Slate Omega, Soldiers In Each Side Structure, 04 (Four) Drawers, With A Capacity Of At Least 60 Kg Each, Progressive Telescopic Rail Sbes, With Two Shock Absorbers Produced In Polymeric Material To Avoid Impact Of Drawers On The “Opens And Closes”, Pullers Stamped On The Drawer Structure Itself, For Structural Purposes And Can Not Occupy The Upper Ends Or Lower Ends. It, Sideways To Support Folders, Tag Holder Stamped On The Steel Structure Itself, Lock With 02 Keys. At Each Bottom End Of The Base Of The File A Triangular Stabilizer Will Be Welded, Measuring Approximately 85 Mm Side, With Internal Folds To Structure The Base, Fixed To The Body Of The Furniture By Welding Points, The Stabilizer Must Shelter A Pink Pink For Level Breadcrumbs. Injected Polymer Level Foot (Black), Hexagon With 3/8 ”X 21, 5 Mm In Length Threaded Steel Level. Flat Head Type, Cylindrical Body, 3/8” Thread In Carbon Steel And Surface Coating (Zinc). Anti-Refuge Treatment System By Tunes The Spray Receiving A Protective Layer With At Least 3 Steps, Demographic And Phosphatization In Hot Iron Phosphate, Rinsing At Room Temperature And Subsequent Application Of Inorganic Passivator