Request For Quotation The Acquisition Of Other Households. Goods

Technical Specification Of Antifreeze Product Model: Totachi Super Long Life Coolant Type Of Technology: Phosphate Organic Acid Technology (P -Oat), Carboxylate Antifreeze, Without Silicates, Borates, Nitrites And Amino Color: Green Or Red (Option G -12) Packaging: Ready For Use (Premixed 50/50), Does Not Require Dilution With Water Freezing Temperature: About –37 ... –40 ° C Boiling Point: Up To ~ 110 ° C (Depending On The Mixture And Pressure) Service Life: Up To 5 Years Or About 250,000 Km With Primary Filling, Technical Specification Of Silent Blocks Front And Rear Silent Blocks Are Bushings Of Rubber And Metal, Which Provide Damping And Sound Insulation Between The Body And Suspension. For Corolla E180 2016 You Need Silent Blocks On: The Front Levers Of The Pendants Are The Lower Front And Rear Positions For The Transverse And Longitudinal Lever. The Posterior Suspension Is A Reptile Stabilizer (Bar Stabilizer) And A Longitudinal Lever. Accurate Oem Numbers: Saylet Block Of The Longitudinal Lever Of The Front Bridge: 48655-02080 Stabilizer (Bar): 48815-02100, 48815-12360 (Depending On The Model) Material: Rubber + Metal Sleeve, Pressure + Vibration Isolation. Set Silent Block To The Side (Left/Right)., 5W40 Motor Oil, According To The Specifications, Technical Specification - Front Brake Pads Car: Toyota Corolla (E170) Year Of Release: 2016 Engine Volume: 1.6 L (Gasoline) Location: Front Axle Brake System Type: Disk Number In The Kit: 1 Set = 4 Pads (For Two Wheels) Material: Half -Metal, Ceramic Or Organic (Depending On The Manufacturer), Technical Specification: (Outer Cv - Joint) External Grenades Installation: Closer To The Wheel (Wheel Side), Front Axle Number Of Teeth: External Slots: 26 Teeth Internal Slots (Transport): 23 Teeth The Diameter Of The Sealing Ring: Approximately 58Mm Hinge Length: About 150–156Mm Hub Nuts: M22 × 1.5 The Number Of Abs -Ring Teeth: 48 Teeth Material: Metal Element With Anthers (Often Neoprene), Lubrication Inside, Set With Clamps, Technical Specification Of The Lid Valve Gasket Oem-Number (Compatible): 11213-0D030, 11213-0D040, 11213-37021 And Similar Material: High -Temperature Rubber/Silicone With Sealing Planes And Sealing Around The Candle Wells Configuration: Includes Covering The Cover And Seals Of The Candle Wells; Designed For Four Cylinders, Installed By A Single Block Thickness: About 0.34In (≈ 8.6Mm) Standard Substitution Spare Part Compatibility: Suitable For Corolla From 2009 To 2017 (Generation E150 - E180), Including Engines 1.4–1.8 L Dohc