Request For Quotation Acquisition Of Electrical Materials

Mechanical Time Relay. Daily Installation On The 35Mm 1No 16A 230V Ac 17.6Mm Reserve. Ip20 Power Source. Mechanical Daily Time Relay; Installation On The Rail 35Mm; 1No 16A; Power 230V Ac; Width 17.6Mm; Reserve. Power Station; Ip20 Protection Degree; Packaging 1Pc., Phase Control Relay. Designed To Monitor The Network Voltage Parameters (Phase Alternation, Asymmetry, Increased And Reduced Voltage) And Command Transfer To Executive Devices. Control Of The Alternation And A Phase Break. Control Of The Alternation And A Phase Break In The Electric Network To Prevent The Exit Of The Protected Equipment. Technical Characteristics The Rated Voltage Of The Ac Control Circuit Is 380V. The Number Of Phases Is 3. Mechanical Wear Resistance - 1 Million Cycles. Electric Wear Resistance - 0.1 Million. Cycles. With Led (Led) Indication. Control Of A Phase Cliff. Control Of Phase Alternating. Minimum Voltage Control. Maximum Voltage Control. Dimensional And Installation Dimensions (Shhvgg), Mm 45.5X70.5X115 Operating Temperature Of The Environment, -5 ...+40 ° C The Number Of Switching (Cracking) Contacts - 1 Conditional Heat Current, 5A Type Of Control Voltage Ev000460, Apbb -22N Control Button Start - Stop Iek (1Z + 1P, Installation D 22 Mm) With Backlighting A Button Dial Switch (Post) Start - Stop Is Designed For Operational Control Of Alternating Current With A Voltage Up To 660 In A Frequency Of 50 Hz And Direct Current With A Voltage Up To 440 V. It Is Used In Electrical Paneling, Industrial, Technological Equipment And At Power Supply Facilities. Mounted On A Shield Or On The Panel. Button Color - Red, Green, Base Material - Plastic The Button Consists Of Two Nodes: A Quick -Detachable Head And Contact Module. The Cap Is Simply Put On The Button And Pressed By The Button To The Panel. The Contact Module Is Attached To The Button Block Due To Fixing With A Plastic Flag. The Modernized Design Of The Pressure Element Excludes Spontaneous Loss. Connection Of The Supply Conductors Is Made With Screw Clamps With Plate Washers, Which Provide Reliable Fixation Of The Wires. The Source Of Backlight Is A Removable Neon Lamp. It Is Possible To Replace The Neon Lamp With An Led Matrix. A Quick -Removable Head Allows You To Quickly Replace The Lamp. Technical Characteristics Type Of Product - Button Double Switch (Post) Constructive Performance - With A Removable Contact Unit Contacts - 1 Closing + 1 Opening The Presence Of Backlight Is A Removable Neon Lamp 230 V ~, Base Ba9s Nominal Operating Voltage Of Alternating Current - 48 /120 / 230/400 / 660 V Nominal Operating Voltage Of Dc - 24/48 / 110 /220 / 440V Category Of Application-As-15 (Alternating Current) / Dc-13 (Dc) Electric Wear Resistance, Cycles B -0 X 106 - 0.3 (Alternating Current) / 0.25 (Dc) Mechanical Wear Resistance, Cycles B -O X 106 - 0.6 Operating Temperature Range, -10 ... +40 ° C The Degree Of Protection Against Dust And Moisture (Gost 14254) Ip40* (S ...