Bids Are Invited For Acquisition Of Dental, Hospital And Support Equipment, Intended For The Modernization And Improvement Of The Infrastructure Of The Goioxim Municipality Health Units, From Resolution Sesa Resolutions 860/2022, According To E-Protocol Processes No. 19.918.863-8 And No. 19.927.407-4.

Table With Top High Strength Cluster And 25 Mm Thick Wood, Postforming 180º System Coating. Front Panel Made Of 15 Mm Thick Cluster, High Strength, Low Pressure, Low Pressure, Low Pressure Melamine Laminate Coating. Structural Column With Steel Plate Finish Passage With Anti -Rust Treatment And Epoxy Paint Finish. Rounded Finishes. With 02 Drawers With Key. 1 (One) Year Warranty, Split Hi-Wall Air Conditioner Appliance, With Inverter Technology, Reverse (Hot And Cold) Cycle, 12,000 Btus/H Thermal Capacity, 220V Single-Phase 220V Voltage, Suitable For Residential Or Commercial Use. It Should Have Minimal Energy Classification At Inmetro, Use Ecological R-410A Or Higher, Non-Flammable And Cfc Free Soda Gas, Removable And Washable Front Panel Evaporator Unit, Anti-Corrosive Protection Condensing Unit, Digital Display Remote Control And Timer, Sleep, Swing (Oscillary) And Economic Noise, Preferably Less Than 40 Db No. Evaporator), Washable Air Filter With Impurities Retention Capacity. Hoses, Copper Pipes And Interconnection Cable Not Included In The Item. Minimum Warranty Of 12 (Twelve) Months, With Authorized Technical Assistance In The State Of Paraná. The Equipment Should Be New, First -Rate, Comply With Abnt Standards And Have Procel Energy Efficiency Seal., Executive Rotating Chair, Medium Size, 12 Mm Multilamated Plywood With Anatomically Injected Mid -Density Foam (50 To 60 Kg/M3), With 45 To 50 Mm Thickness. Seat Coating And Backrest In High Strength Fabric. Waterproof In Dark Blue Color And Minimum Thickness Of 1 Mm. Pvc Edges In The Outline Of The Upholstery. Back System Mechanism. Slope Of The Back Through Lever Activation. Springs For Automatic Backrest Of The Backrest And Adjusting In The Recliner Braking. Gas Seat Height Adjustment, Column Column Detachable, Fixed By Conical Fitting With Turning Axial Rolling, Spheres And Steel Washers With Column And Gas Spring For Height Adjustment And Impact Cushioning Upon Sitting, Driven By Lever. Backward Height Adjustment For Lumbar Support. Injected Polyurethane Arms With Steel Soul And Vertical And Horizontal Adjustment. Made In Accordance With Abnt Standards. Measuring The Backrest 35 Cm High X 40 Cm (Minimum) And 55 Cm (Maximum) Wide, 67 Cm Of 67 Cm X 46 Cm Wide X 45 Cm Depth - May Have Variation Of / - 10. Minimum Warranty Of 01 (One) Year For Manufacturing Defects. With Fixing Ring, Flexible And Chrome Rod, Cast Iron Feet, Epoxy Paint Finish, Approximate Height Of 1, 10 Cm And Maximum Of 1, 60 Cm. The Power Feed Must Be At Least 1, 30 M. It Comes With 110 V Lamp. 1 (One) Year Warranty. Fabricated According To International Quality Standards, Abnt Rules, Present Registration With Ms/Anvisa. Ms/ Anvisa Histerver Record: In Stainless Steel, Total Length 25 Cm, With A Centimeter Segment Of 16 Cm, Being A Degree From 0 To 15 Cm And A Cylindrical Ring (Stopper) That Moves Along The Centimed Segment. Collin Model. 10 Year Warranty. Fabricated