Bids Are Invited For Electronic Dismissal For Pricing For Future And Eventual Hiring Of A Company To Supply Materials For Maintenance, Meeting The Needs Of The Municipal Education Fund - Fme Of The Municipality Of Pinheiral/Rj

Fast Iron Drill - Hss (M2), Entirely Rectified, With Cylindrical Fit And Shiny Finish. Characteristics: Helical Drill, With Robust Design That Provides Quick And Accurate Drilling; Produced In Fast Steel (Hss); Steel Classification: Aisi M2; Norma Din 338; 118 ° Tip Angle; Split Point Din 1412C (For Diameters Only From 2, 5Mm); High Hole Accuracy And High Performances To Cut Alloy Steels Up To R≤800N/Mm² (Rupture Load); Hardness (Hv) Between, Bushing 6 10 Mm Internal Diameter, Compatible With 10 Mm Diameter Screws. Made Of Plastic Material Or Nylon, It Expands When Inserted Into The Hole, Ensuring A Firm And Safe Fit For The Screw., 8 Mm Internal Diameter Bolt Compatible With 8 Mm Diameter Screws. Made Of Plastic Material Or Nylon, 10 Mm Internal Diameter Bolcho, Lime For Dough Package: 20 Kg; Use: Minor Repairs; Rest Time: No Need; Approximate Measurements: Height - 10Cm / Width - 36Cm / Length - 56Cm., 08/01/2025, System X Channel, Capacitor 12 Ufir Model: 12Uf 250Vac; Part Number: 12Uf 2 Wires; Capacitance: 12 F; Maximum Voltage: 250V; Minimum Operation Temperature - Maximum Operating Temperature: 0 ° C - 85 ° C; Diameter: 29 Mm; Length: 47 Mm, 110 Wt Shower Power: 110W (Although Most Showers Have Higher Powers, Such As 3.500W To 8,000W, This Power Would Be Extremely Low For A Shower And Can Be A Typing Error. The Usual Shower Power Is Much Higher. Verify If It Was Not 3.500W Or Other Value). Operating Voltage: 110V (The Shower Voltage, Which Must Be Compatible With The Power Grid In Your Area). Heating Type: The Showers Usually Use Electrical Resistance To Heat The Water. And, 220 Wt Shower Power: 3,500W To 8,000W (Depending On The Model); Voltage: 220V; Heating Type: Electrical Resistance; Material: Heat Resistant Plastic, Copper, Stainless Steel; Security: Protection Against Overheating And Electric Shocks; Installation: Wiring And Circuit Breaker For Shower Power., Cement Composition: Plaster, Lime, Resins, Mineral Loads And Additives. Texture: Smooth And Creamy, Easy To Apply. Application: Can Be Applied On Plaster, Concrete Or Plaster, And Is Usually Used On Walls And Ceilings. Drying: Fast, Allowing For Successive Coats In A Short Time. Finishing: Provides A Soft Surface, Ideal For Painting. Applications: Imperfections Correction, Surface Leveling And Painting Preparation. Resistance: It Is Not So Sturdy, Cement Glue Time Open Time (Second En 1346) 0.6N/Mm2 For 30 Minutes (Gray) 0.7N/Mm2 For 30 Minutes (White) Initial Adhesion Test (Second En 1348) 0.8N/Mm2 (Gray) 0.6N/Mm2 (White) Adherence Test After Water Immersion (En 1348) 0.6N/Mm2 (Gray) 0. Diameter In Millimeter: 115Mm. Diameter Of The Hole In Millimeters: 22, 23Mm. Inch Diameter: 4.1/2. Diameter Of The Hole In Inches: 7/8. Rotation - Rpm: 13300. Speed: 80 M/S., Complete Lock Composition: The Kit Usually Includes Lock, Key (S), R